Modding the Acer Aspire One – hard drive
Welcome to part 2 of a multi-part post on moddng the Acer Aspire One!
In part 1, I showed how to take the Aspire One apart, how to upgrade the RAM, and how to add internal Bluetooth. Today I demonstrate how to replace the SSD with a 1.8″ PATA hard drive and how to reassemble the Aspire One…
Here’s another video and additional pictures that cover the process. Of course, I’m not responsible if you damage anything.
The Aspire One SSD features the same ZIF connector found on 1.8″ PATA hard drives, which are small, light, efficient, affordable, plentiful, and somewhat shock resistant – all this while providing more storage and better performance than this particular SSD. Blame the iPod :)
Apparently, there’s just enough space for a thin (5 mm) 1.8″ PATA hard drive under the Aspire One’s motherboard. I happened to have such a hard drive floating around, a 60 GB Samsung HS06THB. It’s a plug-and-play mod – just disconnect the ribbon cable from the SSD and connect it to the hard drive.
I used double-sided adhesive foam squares to secure it to the motherboard. This adds some padding and provides protection for the hard drive, but makes for an even tighter fit. Check out the pictures.
In part 3, I’ll be adding internal 3G to the Aspire One. Stay tuned :)
Update: As mentioned in various people’s comments on various other posts that have linked to my mod, thick (8 mm) 1.8″ PATA hard drives also fit!
Also, if you are having problems connecting the existing ribbon cable to the 1.8″ PATA hard drive, try another ribbon cable with a different thickness. If the 1.8″ PATA hard drive is not recognized once connected, try flipping it over (it’s unlikely to be damaged if improperly connected)…
Acer, Aspire One, hacking, Images, Video
Damn, I already did the 1.8″ Ziff drive, I really can’t wait to see how you are going to add the 3G stuff! and can you please see if you can also add the SATA connector and the extra PCI-E connector? can you have a look to see if it is possible to add those?
Great work keep on going!!!
hi m8 i have same samsung drive yet the zif cable from the drive will not fit its too thick how did you do yours as yours would have same thickness cable as mine? help please:)
@Kar if you read down the post you would have found out, please look for my posts you will see it, and please reply at the bottom next time.
@Ramon, I’ve ordered some parts to do a 3G mod using the pads for the missing mini PCIe and SIM holder on the motherboard. I’d like to use the pads for the missing SATA connector to provide eSATA support.
Hello. Love your work. I have problem and need help. I bought a samsung HSO81HA 80GB 1.8 PATA. In short, computer did not recognize drive. May have damaged zif ribbon. Where can I get another one? Do I need zif to lif or just zif cable? Need Help. SOS.
Did you get your 80GB 1.8 HD to work? I had a Toshiba with LIF but can’t get the One to recognize it. It have ordered some more ZIF cables from ebay. My understanding is that the ZIF/LIF are just different socket types. Would love to get rid of this damn SSD! Thanks.
Finally up and running. New zip to lif cables ordered from ebay came yesterday. Installed new cables and drive was recognized first try… I had a feeling I damaged the original ribbon when forcing into the samsung drive. Anyway, I am greatful to be up and running and the computer is running smooth with a fresh copy of xp home. Going to install linux ubuntu 9.04 since I have a bigger drive now. Thanks again for all your suggestions out there. Without these posts, and tnkgirl of course, I would be in the gutter…lol…
Where did you order your cables from on ebay?
I have the same problem
Hey Keith, I had the exact problem as Mark, and had to order some flip cables from eBay as well. I haven’t received them yet (Hong Kong to Canada takes a while). Anyways, I’m sure this is what you’re looking for. Go to eBay and search for zif flip. You’ll find lots. I got the 3 pack 5cm, a 3 pack 10cm, and a 3 pack of original.
The original ones have Blue on both ends, flip have Blue (to the Acer) on one end, and White (to the HD). I hope I’m giving good advice since I didn’t receive mine yet to confirm, but I’m confident that’s the problem with these drives.
I have a similar issue with a Samsung SpinPoint HS040HB – Hard drive – 40 GB – internal – ATA-100 – 7200 rpm – buffer: 2 MB.
I have tried 10cm zif cable and 10cm switch zif cable from eBay – the difference being the normal cable has contacts on same side the switch has contacts on opposite sides. Anyway neither works – disc not recognised and I have damaged original cable.
Any ideas please.
Hi Mark and TnkGrl,
I am having the same problem with my connector. I was trying to connect the original zif cable from my Acer one to the new hard drive that tnkgrl is using. 60. GB Samsung HS06THB. And yes it was cheaper getting the drive from Ebay. Ok, so my problem is the cord will not fit the drive. I tried to force it in and only the corners of the cord fits. In doing so, I bent the cord too, trying so hard to get it fit. Mark you were able to buy a new zif cable. What cable did you buy exactly. You ordered a zif (zip??? guessing that was a typo) to lif cable. What is the name of the zif cable or brand. I guess I am asking where you got yours I would like to get for there are so many cables and I am not sure what to get. I would like to get my Acer up and running too!! Please help!! Sincerely Keeya
Hello. Keeya. I would reset the cmos(bios) to your motherboard. You will fund battery under the mother board that looks like a watch battery. Take it out carefully without damaging the battery holder. Leave battery out for 5 min. I would than get a new zif to lif ribbon for 1.8 pata drive. Ebay sellers are selling these for samsung and hitachi drives. Again, read the description carefully. You want a zif to lif cable for hitachi or samsung 1.8 pata drive. Once you get the new cable insert it carefully into the motherboard and the opposite side pata drive. If computer does not recognize, try flippon the cable over on the pata drive and try agin. It might take a few tries but shoild work. Resetting the cmos might help so try doing this first than trying the new cables. If you need a cable I can send u one since I have some left. I ordered from ebay and they came from Hong Kong in about a week. Hope this helps.
THis is item number from EBay of the cable I originally bought
10pcs FPC ribbon cable for Toshiba 1.8″CE(ZIF) HDD
And I also bought 350200114133
3x FFC 10cm flip cable for 1.8″ Hitachi ZIF Drive HD
One of these must work?
The battery remove/replace did not work for me
Thank you so much for the speedy answer. I will try this. Good thing the acer one is so cheap. If I totally destroyed maybe i’ll get another with hard drive built in. How much do you want for the cable? You can hit me up at email@example.com.
This gives me hope!
LOL.. However, I would love to get this to work, because I would have learned something new!
For all of you looking for zif to lif cable on e-bay, I bought mine from E-Bay user i88990. These cables work on samsung and hitachi 1.8 pata drives. hope this helps…Again, alot of people having problems and I am sure its with the connection to the pata drive. Please insert the cables carefully without damaging them. Start with 1 end and work towards the opposite side. You should be able to insert ribbon without cutting or sanding. I have a samsung 80gb spinpoint and did not have to cut or sand the ribbon. It took several tries but finally worked. Also, make sure computer is unplugged and then insert ribbon. If nothing when turned on, power off and flip the cable to the pata drive over and power up…again, i had to do this several times and finally worked…
Hello again. I also wanted to mention that I also flashed the bios with the most updated version (found here http://gd.panam.acer.com/home/ )I used 3309…..secondly, I had to reset the bios. In conclusion, one of these steps helped to get my motherboard to recognize the pata drive..(along with new ribbon)not really sure which one worked but i would try all that is mentioned to narrow down cause.. Remember, u do this at your own risk, I suggest reviewing articles online to get an idea of what your doing…its really not that hard and the more you understand the easier the process is…..here is some info I copied online…use it as a guide but might differ depending on your system….
:If the “Clear CMOS” jumpers are not present or not available:
The procedures for clearing a Bios/CMOS without jumpers is essentially the same as those given above when they are present, it just takes a little more effort.
Shut down the computer and disconnect the power plug.
Locate, if possible, the instruction booklet for your motherboard. If you cannot locate the booklet, then user the motherboard references on this site to locate the manufacturer and see if a manual is available there. You may also want to closely examine the motherboard itself.
Now identify where the battery is located on the motherboard. It will be approximately 1/2 inch in diameter.
Normally these batteries are held into place with one or more small clips over the face of the battery. Carefully lift the battery out of its socket and set it aside. Note: Some batteries are actually soldered to the motherboard, so take that into consideration and be careful.
Leave the battery our of the computer for about 20 to 30 minutes and then return it to its socket.
Now plug the power cord back in and restart the computer.
When the computer begins it’s startup (boot) process, tap the DEL, F10 or F1 key, (whichever is appropriate for your computer) to get into the Bios/CMOS setup. If you need more detailed information as to how to get to the Bios/CMOS setup, follow this link. Bios Basics
Once into the Bios/CMOS setup, look for a section or area to set the Bios/CMOS to its default settings. This will return the motherboard to either its basic or optimum settings depending upon the motherboard manufacturers settings. You will then need to verify certain settings, such a CPU and memory as well as hard drive type and size recognition. If you need more information regarding these settings, follow either of these links: For an AMI Bios or for an Award Bios.
After making any final adjustments, save your settings and restart the computer. The Bios password should be gone and the Bios set to its optimum settings.
Dang! Tnkgrl’s got some serious modding mojo! I couldn’t for the life of me get the original ribbon cable to fit! So looking on ebay it is not clear what to buy — there are some zif flip cables that seem like they might work but it’s not obvious. And are 5cm cables long enough? The original cable is about 7.5 cm long.
I must say you have won another follower.
I am going to buy a One next Monday for my girlfriend and another One for me after that will have this HDD mod and the RAM mod also.
I live in Portugal, so I was worried because I didn’t wanted to give my girlfriend something that could be limited, but she liked it so much and the screen is big enough for web surfing and take to university/work.
With this, I have just a couple of questions>
– How fast is your HDD compared to the stock SSD?
– Is the power consumption bigger?
– Can you point me where to buy exactly the same model as you? I don’t live in the US, and I am sure I will have to find some way to import one or two of those, but I don’t know if the sources I may find will be from good places.
– What would you change in the One?
Well, that it… I think! :)
Thank you very very much for sharing your knowledge and also, for being so cool! ^_^
Cheers from Portugal!
P.S. – Sorry for the mistakes… my Engrish is far from perfect. :P
Um, would you be willing to sell your old SSD? I have a Samsung Q1b, with the ZIF connector, I’m guessing it would work…
When do you will try the msi wind?
I don’t know what to pick… acer or ,si :)
you dont want to buy that ssd..i have one to sell but as others will tell you its slower than hell
Yore’ right about it being so slow – I realized that after watching the video again. I will probably go with using the new STEC Mach 4 Compact Flash as a drive. Only 8G (though larger is available , but costs more) – but should be very quick.
I am wondering about the HDD’s performance, too.
It will be faster than the SSD, yes, but does it worth it?
The same 60GB Samsung will cost me about the same as the 45MB/sec 8GB CF cards and I just can’t decide which of the two is the best (for me), as I don’t care enough for the missing storage space.
@stavrosg, since the SSD in the Aspire One is pathetically slow, the 1.8″ PATA hard drive is significantly faster (it’s an ATA/100 UDMA 5 device).
Keep in mind that most current 1.8″ PATA hard drives are as fast as 4200 rpm 2.5″ PATA hard drives used to be a couple years ago, and are greatly more power efficient and shock resistant.
I hope you’re gonna use the MC875 (the mini pci card from inside the Sierra Wireless 875U)
If so Acer got an extra customer!
Is there a difference in upgrade possibilities between the 512mb and the 1gb version?
I already upgrade the memory and im installing the bluetooth now, im buying the hard drive a toshiba 60GB driveand i want to know if is possible to install two hard drives (dont keep in mind space problems), there are other ZIF connector? im reading somehting about eSATA missing connector maybe on it? connect other ZIF or IDE (2,5″ or 1,8″) hard drive on it?
The aspire one 150 have a 2,5″ hard drive, is ZIF too?
And good job!
Thank you for keeping us updated tnkgrl! If some of you are IRC users, drop by #onelinux on irc.freenode.net. A channel for hacks/mods and Linux.
I’m still wating for part 3 (adding internal 3G to the Aspire One)
So i tried installing a 2 gig stick just to see if it would work, it didn’t. In case anyone else was wondering (like I was) the board will only support a max of 1.5 gigs of ram.
Thanks so much for the video on the installation, that keyboard had me completely stumped! I look forward to seeing whatever new ideas you have,
The max is 2gb, it registers as 1.5 due to gpu/system allocation. I have a 2gb 667mhz kingston and it works great. You have to remember it is the chipset which ultimately determines the ram and the intel 945 which has beenj in use for years now is locked to 2gb, but it must be pc2-5300. That was a huge problem with MPC transport laptops, I get them all the time off Ebay not working because people tried upgrading with lower speed rsm. Pop in a new stick and I got a nice laptop for 60 dollars plus shipping. (don’t try this at home)
I was thinking about adding the 3g to the acer aspire one. I’m looking at the available 52p and sim card holders on mouser.com. Is there a specific one you ordered and why.
I was looking at getting this one for the mini pci-e slot
and this for the sim holder
Any idea if Intel 3945abg wireless card is compatible and could replace the crappy Atheros? Heard of Linux nightmare with Atheros setup and thought we could use some Intel help. Now with the introduction of AOA150-1577 in BestBuy there will be a whole lot more WinXP users/modders. Also, is there a mini-PCI wireless card where 802.11 co-exists with bluetooth 2.0 ? This way, there is no need to fork around with soldering gun. Please update us.
I think you mix up the Broadcom chipset Linux headaches with the Atheros one. Atheros chipsets are widely supported from kernel 2.4 on.
Hi tnkgrl! Thank you for posting these very good guides. I’m really looking forward seing the 3G modem guide..
I love your video verrrrrry much! I have install the bluetooth to my aspire one and my friends r kissing the ground I’m walking on :), but I have problems locating a 1.8 inch hard disc drive. Is there any way I can use a 2.5 harddisc…via adapter or something?
Thanks really looking forward to the 3G mod!
Good work, imlooking forward too see the 3G mod. What modem are you planning on using?
Great work with the Aspire One. I bought it a few weeks ago and I’m thinking of putting in the PATA drive mod and the 1 gig upgrade like you did. You said you were going to put XP on it… how did that go? I tried putting XP on the 8GB SSD card and it was terrible. To slow to even run properly so please let me know how well it works, or if anyone else on here has experience with the mod please post. Thanks!
hi! i’ve recently upgraded my one’s memory and now i’m thinking to upgrade the slow ssd to a hdd. i can get a 60gb toshiba zif drive but this one is 8mm thick not 5mm. will it fit? and is the ribbon on the picture the original one? thanks!
yeah and let me say a big thank you tnkgrl the stuff is brilliant!
Great work tnkgrl! Now, where can you find a suitable HD? No Samsung anywhere and Toshiba MK6006GAH wouldn’t work. I ended up breaking the connector on the Toshiba. The existing flex cable would not insert. It was a bad day. Any thoughts anybody?? Thanks
I just got a Bestlink Alpha 400 Netbook. It’s fine for wht I want it for, which is checking the net and my emails.
It comes with wifi and it’s relatively easy to get on the net provided I am in a wifi area.
I want to add bluetooth to it so when I’m not near wifi I can link up to the net thru my cellphone. It is a Nokia 6133. I have an acct eith T-mobile (USA) with unltd internet.
In the past I have used a Pocket PC to look at things on the net via my phone. But now I want to have a bigger screen and a keyboard.
I think I can find the right adapter to use. It’s the software that’s the problem.
From the info on the manufacturers web page The 400 uses a version of Linux called 2.4. And when I turn the nachine on, it says ‘Alpha 400 – V47’
What do I have to do to get bluetooth to work on my Alpha 400?
and will it work with my phone or other peripherals like a BT mouse?
Hope you are having a good week end!
I’m just wondering how you were able to connect the original ZIF cable to the new hard-drive? I’ve tried to replicate your installation however I’m finding that the connector on the HDD is a lot thinner than the ZIF cable/ribbon. Any help would be very much appreciated. Thank you.
I tried doing your mod, first time I tried anything like this it was a nice experience.
I was happy to see it turned on. anyway I had two problems that I couldn’t figure out, first the keyboard clips didnt come out once I pressed it in.
Secondly, when I went to install XP it says that the hard drive is not accessible I am guessing this is because the hard drive is bad.
Another possibility is that since I took it out of an IPOD it is in an unknown format.
can anyone help
IF YOUR KEYBOARD CLIPS DON’T COME OUT OF THE HOLE ONCE PRESSED IN….
It may not be a perfect answer and it may not be a textbook answer but i saw this question numerous places and no viable answer to the problem, so i took it upon myself to fix this.
I took two black plastic zip ties, and I cut about a quarter inch piece off of the bottom of each (I had two clips stuck)
And I stuck them in perpendicular to the slot.
You can only tell if you really look.. the black blends right in, the keyboard stays down..
It’s better than it was. :-)
I also would like to know if it is possible to put in a 2.5 inch drive. The only problem i see is the connection. I tried looking for adapters out there, but i couldn’t find anything, unless i’m looking in the wrong place. Anyone know anything about that?
THIS IS FOR SAHEB,
I found when removing the keyboard, you push the clip back towards the screen and stick the screw driver in and under the keyboard works better.
In meinen Aspire One kommt jetzt eine HDD rein mit 80 GB 1,8 Zoll! Die Lahme SSD muß raus erst dann wird XP schneller laden und funktionieren! XP kann man per USB Stick installieren. Den Ram habe ich auf 1.5 GB erweitert. Evtl. kommt noch ein 6 Zellen Akku rein.
Dieses Moding macht echt Spaß auch wenn die Garantie die eh nur 1 Jahr betrug jetzt futsch ist.
Habe eine 80GB HDD bestellt Zif 1,8 ich hoffe es wird funktionieren. Die Teile am Gehäuse habe ich mit einem scharfen Messer und Schleifpapier abgemacht. Mal sehen ob es funktioniert und ob es mit dem Kabel hinhaut. HDD müßte noch diese Woche kommen. Man könnte parktisch wie bei tnkgrls Blotoothmod einen UMTS Usb-Empfänger dort einbauen wenn es von der Größe irgendwie da rein paßt!
these should help you finding a Zif to 2.5″ drive converter.
I know that now but its too late the clip that is supposed to be on the left most side is stuck in and can’t be reached, although the keyboard seems secure with two clips holding it down I feel uneasy about leaving it as it is.
Inspired by your mod, I ordered one of these:
When I attempted to install, the connector didn’t seem right. If you have an idle moment, would you tell me if I committed an ID10T error and ordered an incompatible drive?
You rock. Keep it up.
I’d just like to bump Meran’s question. I am trying to do the same thing and I am having issues sticking the ribbon into the zif connector. I have the exact same hard drive, just a smaller capacity. Obviously I am avoiding using any force but I can’t seem to find a lever or switch that widens the entry. There seems to be a black lever just above the zif connector but I can’t move it anywhere (using minimal force of course).
Any help is greatly appreciated.
I’m just wondering how you were able to connect the original ZIF cable to the new hard-drive? I’ve tried to replicate your installation however I’m finding that the connector on the HDD is a lot thinner than the ZIF cable/ribbon. Any help would be very much appreciated. Thank you.
Hey thanks for the great 411 on the acer aspire one.. just tried to do the 1.8 inch drive install.. no good so far.. i have a 30Gb Hitachi travel star.. and when i boot into the bios it does not see anything.. any suggestions? thanks Peter
I too am sitting here with my Acer Aspire One dismantled and a Hitachi Hard Disk attached. (A/A0A6 A/A Model HTC426030G5CE00, 1.8″ 30Gb ZIF)
Like you, the BIOS reports nothing.
I’ve sent one back to the ebayer I bought it off, but it probably wasn’t faulty. I bought an IDE to ZIF adapter, plugged it into my desktop PC, and was able to initialise and format it in Windows.
There just seems to be some incompatibility between this drive and the Acer.
So, it looks like Tnkgrl got lucky with the Samsumg she had lying around. I’m hesitant to go and buy a Toshiba LIF drive (common on ebay) in case I have similar problems.
@Solidus: I had the same problem, the cable is actually pretty durable, I had to use quite a bit of force to get it in, it worked for me. Be careful with the edge of the hard drive. In a failed attempt from the reaction force u may scratch the cable with the sharp side of the drive, in effect you may pull out the pins of the cable, this can be fixed by applying force and pulling back. (Sorry it is hard to explain, it is easier to show how I did it, hope you understand)
@Peter: try reinserting the cable upside down.
yea tried it both ways.. nothing.. maybe i got a bad drive.. is there enough power from the zif cable to support the regular style this drive?? looks perfect but i just wouldn’t do anything.. I ordered a Zif to Ide converter to see if it works.. If not i will copy the current format from the SSD 8GB drive to another 1.8 drive and go from there.. Windows XP SP3 works pretty good.. added the 1 gig of ram and now waiting for a 16GB SDHC card so we will see.. overall pretty nice laptop..
@Peter: Yeah it probably is the Harddrive. The problem with these drives is that you can’t test them to see if they work. And majority of the people selling these drives are selling refurbished or one pulled out of an IPod.
I got it from http://www.getpartsonline.com/hs081ha.html , its a good price and they deliver worldwide.
I don’t know what you did but it simply won’t fit and I destroyed the zif connector in the process *tried to shave off the blue part on the top*. I didn’t try excessive force into the HDD, its worth too much compared to the zif ribbon (I presume) to risk that. In short, it simply WON’T fit. Not that connector anyway. I’ll have to fish out a new one on ebay or something.
If someone can provide an exact process of sliding the zif in, it’d be appreciated. I don’t know why this pain in the back process wasn’t described. Its not as easy as it looks.
Wait which hard drive do u have?
I don’t know much about ZIF drives but I hear Toshiba Drives are tighter than the rest. Why would u pull the blue tape it would barely make a difference.
All I did was brute force it in. the problem is the cable won’t be an easy find. I had a Samsung it is a tight fit, I might open my laptop again I will try to record it for you.
Very good work! I am waiting for the 3G mod. Is it posible to use the empty and not soldered pci e slot? some components are missing right? it would be perfect if there is a posibility of enabling and disabling 3G so as to save battery. Even the wifi switch if you move to the left on windows xp I have noticed that the OSD says “3G on/off”, of course this works with the board outside of the housing, otherwise you can only move the switch to the right and activates deactivates wifi. Please, when are you going to have ready this mod? Could you please advance something to us?
Regards from Spain..
I am using a Samsung too. I was applying force but it still wouldn’t force in. I figured if I’m going to try and force something, screw up the 1 dollar zif cable and not the 90 dollar hard drive. I ordered a few zif cables off ebay (from HK so it’ll take forever).
I wouldn’t record it, I just need to know the following:
1. Did you flip that black switch before insertion? Was it up or down?
2. Did you align the cable, pins facing down (with respect to the logo and drive info sticker), and force it into that very thin slot?
I tried scouring google for some information on this and even the manual that is on Samsung’s website. I can’t believe there are no “idiot-proof” instructions for this.
Also did you use any tools to get the cable in? I found that when I tried to apply force, the thing would bend or slip.
Black switch was up, I don’t remember which way I inserted the cable, I did it both ways and checked which one worked.
I inserted the cable at an angle so when one Side went in I forced the other side.
I added a 1.8 Pata Hdd 20gb but it seems Aspire one is not detecting it ! i put back the ssd and its also not detecting lol ! im not sure where i went wrong yet !
I was wondering there was something on the original ssd cable just something around the cable. what is it ?
hi i am cuurently trying to replace the ssd drive of my acer aspire one to a 40gb hard drive.
one problem i had was that the ribbon connector frm mother board to hard drive was accidentally torn when i had wrongfully fiddled with it trying to get it slotted into the hard drive slot.
do you any soltuons to get around this? many thanks for any help u can give
Hi. What are the chances of building in wireless for mouse and keybord? Something that can be switched on and off to preserver power, and which can easily be replaced if necessary? Regards
@Veneto, it’s called Bluetooth.
@Veneto , you could also just use normal RFID wireless keyboard and mouse setups. It will occupy one of your usb ports.
Although in my opinion a full keyboard and mouse defeats the purpose of a netbook (sub notebook or whatever you wanna call it.)
@Edward try inserting the cable upside down, don’t insert the MB side in the HDD (it doesn’t seem to make a difference, but what I mean is turn the cable upside down and reinsert the same side of the cable upside down).
Got my new cables and I tried forcing it in. It doesn’t seem to go in too far which is what I suspect. However, it didn’t seem to draw any power (it wasn’t recognized in the BIOS. Did you put it pin-side facing the harddrive?
Wow! I am so excited to have stumbled across your fabulous upgrade montage! You are awesome, girl! I just happened to have bought the 2.5HD XP version from WallyWorld and am increasing the hard drive capacity. I had no idea your wonderful tutorials were even here till I Googled for help in opening the case. Thank you, TY, TY!
I’m so encouraged to try to follow along with you. Some questions, if you have time, please?
– What max capacity SODIMM can be recognized? >1GB?
– What MiniPCIe & SIM connectors should I order? (And who will sell just 2?)
– What thickness Kapton tape do you use? (sorry to sound like such the noob, but I am!)
Thanks again for such a great tutorial on what’s already the cutest lil laptop going.
(BTW, I like your new Honda too. Call me a copy cat, but now I’m looking at that too!)
The Limit is 1GB DDR2
as for 3G try this “https://tnkgrl.wordpress.com/2008/08/14/modding-the-acer-aspire-one-bluetooth/#comment-9947” – click on the HSDPA (http://www.mobile01.com/topicdetail.php?f=232&t=724057) – I don’t wish to take credit from “SS”
I will try opening the case today to see how I inserted the cable. When I inserted the cable the black lock on the hard drive (for the cable) was a little hard to close.
Try inserting the cable by pressing on each side until you can see about 1~1.5 mm of the blue tape. Also try flipping the cable.
The limit is 2gb, it registers as 1.5 and allocates .5gb to GPU/system. I have a 2gb 667 kingston and it runs well enough. Slow as hell with this 8gb disk, though.
I tested the actual depth and I did get the wire all the way in. I then flipped the cable and it was detected by the computer (I left the case open to do the tests). After putting it all together I was able to boot it up and install WinXP so all seems to be working.
I noticed that having that double-sided padding tape raises the motherboard slightly on the HDD side. It does so enough that the board needs to be screwed down to connect to the battery. I wonder how much stress this will put on it.
Either way, I was able to replicate the work above. Its just tricky. [=
Solidus if you watch the Video again you will notice that tnkgrl pads the disk from what used to hold down the SSD drive, just cut it out and the drive will settle down nicely, personally when I found out that I will have to force the drive down, I didnt trust it. But I guess its up to you. (For anyone else trying the mod, for the 8mm HDD you will have to cut the SSD screw socket.)
Grats on completion of the setup, I was just about to open my laptop up.
Excellent site and post on modding my new Acer Aspire One. Just a quick question on the Part3 for Adding 3G – any news on when this maybe coming? Pretty please :)
Thanks and keep up the excellent work!
@Wayne, I got the parts and installed them – the mini-PCIe card is being recognized, but I’m still working out some kinks with the SIM holder… It turns out there are more parts missing than just the mini-PCIe connector and SIM holder – I plan to have part 3 of the mods published by the end of October!
Excellent news – will keep me eyes posted on your site. Whilst also spreading the word of the good things your doing. :)
Nice video. Very informative. Wish I found you before I added 512RAM to mine. Interested in replacing the SSD like you did. Was wondering if you think an 8mm thick drive would fit? There are more of them out there that I found in a quick 5 minute search. Also, do you know if the 6 cell battery will fit on a system that came with a 3 cell? I called acer to ask them and they said the product is still to new for them to have any info like that yet!?! After an answer like that I am not even sure they sell replacement parts like a battery or power cord yet.
@Brian, The 8mm is a little harder to close, other than that there doesn’t seem to be a problem. I recommend the 5mm (I got it from http://www.getpartsonline.com/hs081ha.html).
I am pretty sure the 3-Cell and 6-Cell are interchangeable.
Saheb, thanks for post the manual. im interest to read about Acer one
I tried using my mic today and I found out that it isn’t working, its giving some scrambled output. I think maybe the sound cable is loose, maybe I didn’t refit it back correctly can anyone check their mic works, I don’t feel like opening it up and finding out its some software issue.
@Info Media: No problem I found it at: (I forgot to give the source)
hi this site is great i am thinking of upgraging my acer aspire one but i am a little worried about getting the wrong drive so i was wondering if someone could tell me if the toshiba MK8022GAA 80gb hard drive will fit in ok it is 5mm thick but i am not sure that the connector is correct i think that it is a zif but i dont know weather it is a thick or thin type or if this matters??????
It’s just that the 8mm drives have such better performance like 5200 rpm and 8mb cache. I think I’ll try the faster first. Thanks for the input! I’ll let you know how it goes.
I finally got an 80 gb hdd that fits with new zif ribbon, but it isn’t recognized by the laptop at boot up. Nothing found in the bios. I’ve got a samsung model: HS0-81HA. I’ve formatted in NTFS and activated the drive. It is recognized by other computers I have, but the Acer just can’t see it as a viable hdd. I’ve been working on this project for months and think I’m really close, but just can’t get through this last problem.
I initially got an 8mm thick 40 gb drive, but the zif ribbon wouldn’t connect. Found some zif ribbon that worked online, but didn’t like the bow on the motherboard because of the extra thickness. Got the 5mm thick hdd, but broke the external hdd enclosure during the formatting process. After a new zif to usb connector arrived, and a double check on the format, I can’t get the laptop to even see the hdd.
Please help, I’m at a loss!
Thnx’s for the manual.
Gonna try kicking out the SSD and put in a high speed CF card
Chucking in a 16GB tonight.
Actually wanted to use an SD card (lower power consumption) but couln’t find a ZIF2SD adapter.
Also found out a ZIF2SATA with a SATA harddrive works oke. Need to fiddle a bit, and it’s a tight fit. Need to really check the power consumption on the hard drive. Especially Spin up and idle power consumption influence battery capacity.
FYI (for your information)
Okay beware there are three different kind of ZIF connectors.
(Yeah marketing and competition, we found out the hard way last year upgrading mini notebooks…..)
For the One you need the Toshiba/Hitachi variant.
Got the 80 gb hdd samsung model: HS0-81HA,
problem is the ribbon will not go into the holder in the drive.
Any ideas and where can I get a replacement ribbon from as this one may have got damaged!
cool Great thanks for the video on how to do this. Going to try it next week.
Satellite TV on PCs Today
Here’s a article on the different type of ZIF connector, that explains the issues with some installs:
“One other important note – there are two different types of ZIF
ribbon cables, which differ only in the thickness and color of the
ends. Hitachi ZIF drives, and most adapter boards, take a thicker
cable end which locks into door-type card connectors that roll
toward the card edge. This end is the blue one.
Toshiba ZIF drives, and pretty much all others, take a thinner,
white cable end, and have a different type of cable lock
which rolls down away from the card edge. This is usually an
extraordinarily thin black bar which at first you’d mistake for
part of the connector. Here it is open, and closed – look carefully!”
Does anyone have some idea about getting the motherboard to recognize this newly installed hard drive? I’m using a Samsung HS081HA. It fits properly, the zif ribbon connects to the board and to the hdd right, but during the boot process, there is no hdd recognized.
my 20gb HDD does not work… I tested the HDD with another UMPC (samsung Q1U), with Acer One the hdd probably does not get (enough) power ??? it does not even spin…
did you resolve the issue somehow ? maybe it is the cable ? (however it works fine with th original SSD)
just changed hard drive in my new Aspire one with hard drive from Walmart. Used drive from 320G Free Agent Go also from Walmart.
Downloaded Seagate Disc Wizard to clone installed drive. Pride open side of agent’s disc case, Inserted guitar pick and ran it around case to break tape glue joint.
Not too much trouble getting keyboard off computer. The key board surround came off easy after I figured out it had to come off with aluminum shielding under keyboard.
Everything else is like tnks pictures except for missing jack for SSD. I have some pics my computer apart if you want them.
Thanks for help.
Great post! Thank you very much for the pictures. If you wouldn’t have posted them I wouldn’t have opened my netbook to insert a hard drive. The change was quite easy to do and now I am able to use my Aspire One like a real notebook. Thanks!
I replaced the wifi card that came with my A150 using an Intel 3945 card. Worked like a champ with Ubuntu 8.04. IT was much better than the hit or miss wireless the original card had. After all what good is a netbook with no net?
Hey there , what your doing is awsome, i live in australia and for the life of me i cant seem to find anywhere to buy the ‘samsung 1.8 inch ‘ hard drive ,,,,, can you please recomend a site ,,, thank you
I accidentally broke my screen. Of you or anyone you know knows of a place to get free replacement screens for aspire one I would be very happy. And when my bonus comes in I will give to that person.
<touchscreen for Acer Aspire one…!
Actually, if you have a SSD version of acer Aspire One, to tweak the slow SSD, you just need to is (1) format your XP with fat32, not NTFS (2)disable the paging file in XP, (3) upgrade the ram to a total 1.5GB, (4) go to task manager and click “view” tab and update the speed to high. (5)Install ‘Windows Fundamentals for Legacy PCs’ is the best choice as it is the lite version of WinXP debutted originally by Microsoft’s folks, unlike those done with nlite.
If you don’t know how to disable paging file, do the two things as follows:
1. Enter System Properties, either by right-clicking the My Computer icon on the desktop and selecting Properties or by doing the same to the My Computer icon in the Start Menu.
2. Once the System Properties window has loaded, click the Advanced tab and then click the Settings button under Performance, as shown in Figure 11-4.
3. Once you are in the performance options, click the Advanced tab again.
4. Click the Change button that is located under the Virtual Memory section.
5. This will load the Virtual Memory screen. Locate and select the No Paging File radio button, as shown in Figure 11-5, under the Paging File Size for Selected Drive section.
6. Click the Set button and then click OK three times and you are finished. After you reboot, your page file will be disabled.
Go to Start>Run, type in: regedit
Follow this string to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager\Memory Management\DisablePagingExecutive
Double click DisablePagingExecutive
Set the value to be 1
Restart your computer for this to take affect
That’s all. Afterall, you don’t need to sell your Aspire One. Follow my instructions and you get the rarest lag with your One.
Olivia you do know that “4) go to task manager and click “view” tab and update the speed to high.” makes your computer a little slower nothing noticeable, its just makes the performance chart update faster.
FYI to all….
I recently upgraded my Linux ssd Aspire One using a toshiba hard drive and a 3945abg (after trying to get ubuntu to play nice with the atheros) and thought I’d out in my 2 cents. My battery life was pretty good until I upgraded to the Intel 3945abg. I also dual boot with xp pro and found that if I tweaked the 3945 ‘s “advanced properties” and set it up for max pwr savings as well as lowest xmit pwr, my battery life is back to 2hrs 30 mins (in XP) on a standard battery. Seems to have done wonders.
Haven’t found the tweaks for ubuntu power savings yet.
I’m using the GOS gears (ubuntu 8.04.1 with a fancy ribbon interface) and can say that everything works , including the wifi switch in both linux and win xp using nothing more than the default settings in GOS and the latest wifi drivers from intel. Even the network led works.
The 3d performance is really good in Linux with the export INTEL_BATCH=1 tweak.
For the for the ipod hard drive mod, how did you reformat the hard drive to run an operating system?
Hehe, I tried out this mod today and here I am typing with my new modded One. :) I cut some plastic to make the drive fit even better under the mobo. The drive I have is pretty much same 60GB Samsung like you have, but I think a bit newer model (a bit less than 5mm thick), and it works like a charm! :)
I wonder what causes a bit nasty sounding clicking sound when the drive idles a while? maybe a driver problem? The drive ain’t falty at least, at least I haven’t damaged it and it’s brand new :o
I’m having the same problem with my ipod hard drive. I can’t seem to get an operating system installed on it so that the Aspire One will recognize it. I’ve posted a couple of times on here, but no helpful information yet. If you learn anything, please post here.
@Eric Try using the ribbon upside down, read my earlier post.
About the clicking sound with the Samsung drive I mentioned earlier:
There is a problem with APM with certain HDDs (Samsung ain’t the only one). I haven’t found a permanent solution to this problem, only temporary solutions like “hdparm” in linux. The main problem is that the drive unloads its heads repeatedly when idling. That shortens the drives life span dramatically. Any help to solve that problem appreciated :)
@Jack The clanking sound you speak of is the Drive being under pressure, which can mean that your hard drive is a very tight fit try making it loose. so there is a little space to breath.
I actively follow your Aspire one mod blogs. Can you add a GPS to it? I found a CF card based GPS and did some research but no one had luck so far…Would be a good idea for your next tweaking of aspire one
Enjoy your trip
Google’s Android modified for a Netbook..you might be interested
That was my thought also in the first place, but that wasn’t the problem and yes, I arranged a plenty of room for the drive inside ;) It’s the APM (Advanced Power Management) I mentioned earlier that is causing the clicks. Known issue with some hard drives. Why I know? Because the temporary solutions mentioned here: ( http://www.thinkwiki.org/wiki/Problem_with_hard_drive_clicking ) are working and stops the clicking. I think if the drive would had been under pressure it’d be dead by now already :)
Well I did the upgrade on mine today and now it won’t do anything. After I put the memory and hard drive in I tested it before I put it all back together and it worked. Then after I put it back together it doesn’t. I don’t get any leds at all. Looks like I’ll have to RMA it and hope they don’t notice I had it apart. In the meantime I’m going go pick up a Lenovo S10 and if they fix the acer I’ll put it on ebay. I hate days like this!
Thanks for the enlightenment didn’t know about that.
Did you try and open it again and see if it works?
The videos from part 1 and part 2 are not working :(
Yeah I took it all back apart, took out the new RAM, put the old drive back in… no luck. I’m trying to RMA it today. In the meantime I purchased a Lenovo S10 and will be selling the One when/if I get it fixed.
I did this hack(1.8 toshiba 30gb hdd “mk3008gal” from ipod video) to my One like two months ago with no problem at all. Then decided to upgrade it with a larger capacity disk(1.8 toshiba 80gb hdd “mk8022gaa” from an ipod clasic) without no luck this time… Hard part is done, as I installed it the same way, but when i try to install the OS(XP), the Bios recognizes it but the OS Setup states that it cant find a disk. I’ve searched and found some people having their disks recognized by the bios but not by XP setup, but no answer to them has ben posted…
Any help will be realy apreciated…
The link to to the 60GB hard drive samsung dont’ work
@Carmelo Samsung changed their website… I fixed the link!
I also have a hs081ha. I don’t understand why it won’t recognize. Saheb says turn the cable upside down, but why? It works fine in my external enclosure. So how does flipping the cable help? Which side do I flip? The one on the mother board or going into the drive itself? My hard drive has an Apple logo but I formatted to NTFS. Is there any other setup needed for the drive to work?
Anyone know what the default included brand/model SSD comes with the Aspire One and its read/write speed? Obviously its painfully sluggish.
Would this one be compatible and much faster?
MTRON MOBI 1.8″ 16GB PATA ZIF SLC SSD
follow-up: Saheb, can you show a photo of your bios confirming the hs081ha is working in your aao?
I will take a picture for you tonight.
Thanks. And in case it doesn’t show up in the photo, what BIOS version are you running?
Also, thanks to tnkgrl for making this thread available for stuff like this.
Please show if your Samsung 80gb is working, I want to buy one!
Could anybody tell me which 80gb 1.8 inch 5mm hdd is best for the aspire one?
And it is tested.
Thank you, Saheb how can I contact you?
Forgive my impatience, but still waiting on BIOS photo and version number…
Sorry I completely forgot I got drowned in work I have a clear schedule today.
http://njabi.net/etc/ for the pics
Thanks Saheb. I’ll try again ;)
Success! It recognizes now because I “flipped the cable”. I had tried it before but I flipped the wrong side. For some reason when I connect to my external case it goes in one way, but when attaching to the system it goes in the other…but not on the mother board end. The actual hard drive connection to the zif wire needs to be the opposite way. Strange but true. hs081ha is recognized by bios 3109.
I have a Toshiba 80gb(mk8022gaa) disk and it shows in the Bios but i can,t install the os since it wont recognize it…. maybe some drivers are needed but I can’t find any for this disk. I saw some posts on an Asus eePc forums with others having the same problem…
@ Rick, I had that problem I gave the drive back as DOA. it was a 80GB Toshiba 8mm I don’t remember the model number. if you can just return that drive and get another one.
@Robb, glad I could help.
@Dan I have a spam email firstname.lastname@example.org please use a meaningful Subject I check it every week so be patient for a reply.
so 8mm drives work ok? has anyone tried the new toshiba 100gb drive? trying to find a good disk to put in place of a stock ssd aspire one (thin cased version)
hi tnkgrl, thanks for sharing the mod processes. By the way, the part 2 video seem to be unavailable. I’m getting a:
500 Internal Server Error
when downloading the video.
Olivia – turning off all the extraneous journalling and paging options doesn’t make *that* much difference – I’ve been building cut down images for ages [mainly for workplaces with old PCs, etc] so I have a decent idea of what to do, and your list covers 99% of it [you can also use bootvis [google it ;) ] to speed up boot times etc but it’s still annoyingly slow, and having the SSD with the jMicron controller means that it craps itself every time it fills/clears it’s cache.
I have been concerned about getting the right HDD for the AA1 I have [mit +1Gb RAM] and now having read aaaaalllll the way to the bottom of this page, I think an Intel 354930503AGBG11!!1!1LOL Wifi card might be on the order books too so that I don’t have to mess about with NDISWRAPPER on *nix either. Think I’ll ignore the 3G card though, that’s what bluetooth and a good 3G enabled phone are for. Would rather hammer the battery on my Nokia than on the laptop when attempting to kick servers in VMWare Infrastructure from the train/pub/bath etc.
Nice work tnkgrl – keep it up, and keep getting your hands dirty.
PS: Saheb, you really know *far* too much about this stuff – I’ll check your pictures in the future should my HDD plans suffer EPIC FAIL…
@ thomas : I am saying I don’t know if 8mm works, from what I read it doesn’t seem to work.
@ Steven Raith : Actually I don’t know that much, but I do share what I know. Seeing how tnkgrl stopped responding to this thread, I thought I could help.
Try installing a SSD instead, result is awesome, even with a (cheaper) MLC-Drive.
Total transfer is slower than SATA-HD, but 0.6ms accesstime is very nice, especially while booting or other access to many small files. (Win7 about 25 seconds from power on until WLAN-Connection established!)
Just tTry it, such a 64GB MLC-SSD is about 100€ in retail-stores.
SLC would be better but still inaffordable, about 300€ / 32GB.
Greetings from Germany
Rob and Saheb:
I too have the Samsung HS081HA, working and all well except that win7 will not let my aao sleep, hibernate works though.. If you can confirm that sleep works then i know for shure it isnt my HDD, and can move on to check if it is my DW1390 or my BT dongle that i soldered onto the motherboard at the same time.
I cannot confirm that as I don’t use Win7.
I have the HS081HA like Saheb, and it works although it seems sort of slow. Mac OS X took 3hrs to install.
I had a hard time getting the stock ZIF cable plugged in as it seemed the blue lining of the stock cable was too thick to fit in the connector. Instead of cutting the cable, I just used a little sand paper to make the blue liner thinner. All seems to work fine now.
I have my triple boot goal accomplished, Fedora 10, Win XP, Mac OS X
bwlinux: yes indeed it is a really slow hdd, around 30MB/s read(write i dont remember from when i tried HDtach on winxp), me myself are running Fedora 10 XFCE, Mac OSX and Win7, of all these OS i found that Win7 actually is the fastest one, though i have not installed any antivirus(that would probably suck out 50% of the cpu ;))
Maybe you too uses a DW1390 (since you also are running OSX), do you get sleep under WinXP to work?
I need serious help here. I’ve taken my Acer Aspire One apart (8GB SSD model, not 120GB model). I bought the Toshiba 1.8″ 20GB MK2006GAL drive. Its too big! I had no idea it was too big and the connector is totally different. I thought its supposed to be a PATA/ZIF, but its not compatible.
I need to know what speedy SSD brand/model is compatible with this netbook version with proper connector.
I cannot even figure out how to get the keyboard clips out so I can snap it back in.
Thanks for posting this!
@ Chads take a slim object or a minus screwdriver and place the clip back in from behind. You will have to left the tape a little.
hey tnkgrl, I followed this guide long ago, but some how my 1.8 HDD died on me, buying another 1.8 HDD was really not practical for me with the 2.5′ HDD on the side with 250GB, looks very tasty for some modding, so i did this http://www.theacerguy.com/2009/01/aspire-one-a110-25-sata/ hope you like it!
That’s an awesome mod! Congrats…
Thank you, I am hoping to to a bluetooth mod on here, but then I need to get another bluetooth dongle, then i will have both my 5920 and aspire one equipped with bluetooth. but I can’t seem to understand where you have soldered the 5 volts for the bluetooth, can you shine some light for me?
What SSD replacements work and/or improve the acer one? I replaced the 8gb sdhc with 32gb sdhc and am now turning my attention on the inside. I found that intel is supposed to come out with a 16gb version any day now that could be a replacement for the 8gb but have also come across other PATA SSD drives. Would they work? What do I look for in PATA SSD drives for upgrading the ACER ONE. Thanks!
as long it is PATA with ZIF connector it should work as plug and play.
the 8GB SSD on aspire one is really slow, 24MB/s read, 5-7MB/s write(I recall) with the 2.5′ I added, I am getting 48mb/s read(write is botu 25MB/s) much much better performence increase
Hey guys/gals i could use some help. I have done the ram and bluetooth upgrade, and am trying to do the HDD swap.
I’m running the latest bios, 3304 and trying to use a toshiba mk3008GAL 30GB drive. Now i had this driving running jusit fine in an external enclosure, and have attempted to use the thinner cable from my enclosure to connect it to the aspire one. My drive will not show up in the bios….i havent bothered to attemp to load windows xp installer, as i’ve read other people can see it in the installer, but the system never boots to the drive because its not recognized in the bios.
Is this an issue with the current bios, or my drive? or do i technically need to be using the zif to lif style connector. I’ve tried flipping the cable every which way, but im sure i have it installed right.
Any advice would be great, i’ve read other people having luck with this same drive.
I have the aspire one, aoa-110-ab
I’ve bought myself an Acer Aspire One, and plan to add a hard drive.
I found that 8mm drives are easier and cheaper to obtain than the 5mm you used. Do you think it will fit?
If not, i’ll just shell out the extra cash and get the 5mm one.
It is a safer bet that 8mm drives don’t work, they fit OK though. I would suggest you get a 5mm Drive.
In Europe all A1 are equipped with standard 2 1/2″ (inches) drives.
As far as I can see there is no difference to tnkgrls images concerning the available space inside the A1.
Maybe the connector could be a problem, european A1 have a standard-SATA connector onboard.
maybe you should take a look at what I have done http://www.theacerguy.com/2009/01/aspire-one-a110-25-sata/
There are two models available. The A110 which is the SSD version, and the A150 which is fitted with a 2.5″ SATA drive. On the A150 the bottom of the casing is different in that it has a ‘bulge’ to accommodate the hard drive. I have th A110 which is exactly the same as the one in Tnkgrl’s video. (Except mine has a UK keyboard).
i put an 8mm drive in my acer that came with an 8gb ssd.
the cable is a hassle to get to fit but the drive fits no problem. there is just enough room for double sided tape and thats about it.
Thanks tmo. :-)
@tmo Thank you for clarifying that. Can you please name the model and brand for future reference.
Really? no one has any advice for my question?
60GB ZIF Toshiba HDD1724 4200RPM 2MB 1.8 in. MK6008GAH
bought it on ebay and i thought it was a 5mm drive, but it 8mm for sure and fits fine
what cable did you use for this HD model?
@Tommy: I would Advice you respond at the bottom of this thread, I believe He used the original cable that came with the system. Be warned it is a really tight fit. You need to be very careful when squeezing it in. The worst part is that when your done forcing it in, only to find out that you inserted it in the wrong way up. Good luck.
does the drive spin up when you power on the computer? try plugging it all in but dont reassemble it. you shoud be able to hear the drive spin up.
the cable can be very tricky to get in. you have to sand it down and if you sand down too much it will slip right out. pain in the ass to get it right thats for sure.
I actually have this LIF cable that came with the drive….i had read someone else using one of these thinner cables on both ends and it working.
I have not sanded down the original cable yet….do you think this is the problem? trying to use the LIF cable in the ZIF connector on the board? Seems like a pretty secure connection.
Would i just simply need to get a lif to zif cable from ebay?
I haven not tried booting the drive with the case open yet, i’ll do that tonight when i get home and reply back
Heya, for all those people who have a bad hustle with screwdrivers.
Thus how about installing ur Acer Aspire One without even having to open it, I got it running with a s-ATA 250Gb 7200 16Mb cache 2.5 inch HD. I put this all in a pink vento Asus casing. connected with 2 usb cables on the right side of the device.
It runs fine with 512Mb ram on Vista Ultimate (ofc the 1.5Gb showed here is allways the better. But 512 doesnt bugg.)
Able to run movies (DVD) smooth in a virtual DVD device setup with 4example(daemontools).
Ofcourse you set the SSD to second boot in Bios.
And let it boot with ur USB-HDD which will work fine.
I recommend setting ur (usbHD) as plain default like any other sataHD on another Desktop pc to just hook it up to complete ur S-ata install Vista (like u normal would) (default without adding any drivers ofcourse) after thats done u run a small hack to bypass the BOD ( simply cus Vista wont setup on external drives ) And start the disc connected to ur Acer when you installed the *.inf shown here:
To save u from the research use this string as an *.inf file
AddReg = usbservices.Addreg
CopyFiles = usbstordr
1 = yourcdrive,,,\windows\system32\DriverStore\FileRepository\usbstor.inf_bb2778a0
usbstor.sys = 1,,
DefaultDestDir = 12; DIRID_DRIVERS
HKLM,”SYSTEM\CurrentControlSet\Services\usbccgp”,”DisplayName”,0×00000000,”USB parent Driver”
HKLM,”SYSTEM\CurrentControlSet\Services\usbccgp”,”Group”,0×00000000,”boot bus extender”
HKLM,”SYSTEM\CurrentControlSet\Services\usbstor”,”DisplayName”,0×00000000,”USB Mass Storage Driver”
HKLM,”SYSTEM\CurrentControlSet\Services\usbstor”,”Group”,0×00000000,”boot bus extender”
HKLM,”SYSTEM\CurrentControlSet\Services\usbehci”,”DisplayName”,0×00000000,”USB 2.0 Enhanced Host Controller Miniport Driver”
HKLM,”SYSTEM\CurrentControlSet\Services\usbehci”,”Group”,0×00000000,”boot bus extender”
HKLM,”SYSTEM\CurrentControlSet\Services\usbhub”,”DisplayName”,0×00000000,”USB2 Enabled Hub”
HKLM,”SYSTEM\CurrentControlSet\Services\usbhub”,”Group”,0×00000000,”boot bus extender”
HKLM,”SYSTEM\CurrentControlSet\Services\usbuhci”,”DisplayName”,0×00000000,”Microsoft USB Universal Host Controller Miniport Driver”
HKLM,”SYSTEM\CurrentControlSet\Services\usbuhci”,”Group”,0×00000000,”boot bus extender”
HKLM,”SYSTEM\CurrentControlSet\Services\usbohci”,”DisplayName”,0×00000000,”Microsoft USB Open Host Controller Miniport Driver”
HKLM,”SYSTEM\CurrentControlSet\Services\usbohci”,”Group”,0×00000000,”boot bus extender”
Thats all you need to do to complete ur Vista install on an AcerAspire One ( I had the linux version to try the upgrade on same like the one worked on here.)
ps. Dont forget before you finalize the USB disk & close it that u did pass the point that you installed SP1 & hotfixes and from there, created a restore point with the bypass ‘to make USB-vista boot work on ur PC with the *.inf (copy&paste into a *.inf ofc.) that file I have shown you above.
This to avoid the part were you get stuck on BOD with an update that changed the usb ‘hack’ and can simple redo the inf before you boot or have ur HD allready in the usb casing basically*!?!.. (then restore to previous working will keep ur system just run fine on boot thats ur (F8), if for any reason is my point.)
ps. In the end you can to my opinion turn of windows updates automatically untill you say so!
Also making a complete backup should be done b4 connecting to usb (that is if you want to, I skipped it.)
Have a nice day.
Vista drivers used:
wlan is the basic ‘were to start with’ the Atheros_v220.127.116.11-whql for vista32 dwnl on Atheros.cz AR5007EG
Lan = Realtek RTL8102E
ur Vga = Mobile Intel(R) 945 grab the file called winvista_1583 from itel’s site.
The webcam will work no specific driver needed.
Ur usb cable to ur usbHD will be the Aorta of ur pc so I dont recommend unplugging it untill ur pc is totally turned off if not just leave it there ;)
Hey people, if you have the Acer Aspire One and want a decent operating system on it, I recommend the HP MIE:
take a look:
Ok, got my problem fixed, i would have needed to pickup a LIF to ZIF cable for the toshiba drive, or i took the cheap way and sanded the one end of the cable that was used for the SSD. Works perfect….this netbook is blazing fast by comparison now, i love it…i can even get some decent games to play on it :-)
Also, i opted to use a 60GB toshiba drive, that is 8mm thick….fits just fine, you just have to cut off a couple of the screw standoffs used for the SSD drive, then i secured it in place with some sticky tack…which does a nice job keeping it in place, and reducing noise vibration, can’t hear the drive no matter how hard i try to.
On my post above.
ps. To avoid large filetransfers to be cutoff/discontinued with a [Vista bugg] happening for example large ISO files, I recommend setting the wireless vista32 Atheroz AR5007EG manually on ur AcerAspireOne 110 :
To a [ AR5006X 18.104.22.168 ] that fixes the problem of cannot acces source file through ur wireless network.
This problem didnt occur on winXP drivers (if you use winXP ofc.) this problem occurs only when you have any vistax86 AR5007EG drivers for this device.
And will solve that you can complete large filetransfers, without the cannot acces source file randomly on //..network.
Have a nice day anyways.
Hi. I’ve found this Samsung M5 160GB 2.5″ PATA 5400RPM 8MB HDD on http://www.ox.lt/lt/product/48931 and i’m wondering could i replace the crapy ssd and put in this hdd? i’m from Lithuania, so sorry for my mistakes if there is any :)
I have a Acer Aspire one. I wanted to know what it looked like inside and this video showed it super good. The taking very good too! I can see how to open it now. Some time I my for somthing.
Very good video of the inside of the Aspire one! Thank you!
Tried installing a Hitachi 20gb 1.8 hard drive the my aspire one but I get no power to the hard drive. Anyone know if the cable needs to be flipped? where is pin 1 on the board? I see pin on on the hard drive, but I see nothing on the board.
Replacing the hard drive was a tough mod and will totally invalidate your warranty! I found a Toshiba MK3008GAL for an OK price. I disassembled the Aspire One and installed the hard disk. As per tnkgrl, I placed the hard disk where the old SSD was, this required that some parts of the case were cut off to make room. The biggest problem I found was the cable. The Aspire One SSD has a different ZIF socket to the Toshiba ZIF socket. So, first I had to remove the blue strengthener, but then the cable was too thin so I had to add some tape. Then it all seemed to work. I didn’t re-use the ferrite, hopefully this won’t be a problem in the long term. Reassembly was straightforward. Of course, all software needs re-installing.
when I connect my mk3008gal to the connector and start de AAO, I`ve got a blank (black) screen. I have the right cable (lif to zif). If I take the SSD all is ok.
is the hdd crashed?
I was having this problem too – im hoping my HDD hasnt crashed, maybe I’m not using the correct cable as Toshiba apparently uses smaller ones? Worst case senario I will use a flash card with fast write time and sell my HDD on ebay.. Anyone else have this problem?
same problem here, Does anybody know why a black-blank screen is all that we have when the toshiba mk3008 hdd is (properly) connected ? Anybody has a solution ?
sorry about my poor english, i upgraded my aspire one with an ipod 80gb 1,8″ hdd.
the bios recognize it but the xp installation says can´t acces to disk and sow an blue screen of death.
i try low level format the drive but i can´t cause an error says password protected, i don´t put any password and the ipod runs ok.
Hi, last time I opened up my AA1 to change the ssd with a 1.8″ hd…I had a friend which owns a 5g ipod which he doesn’t use anymore…I decided to test the drive. It was an hitachi 30gb drive…Unfortunately, the bios doesn’t recognize it. I already inverted, and flipped the cable but still no luck. There was no sign that the drive was spinning at all..I placed back the ssd and it was working fine…Am I missing something? Thanks alot
Hi Tnk girl
Just wanted to say thanks for the videos thanks to this my Aspire One (110A) now has a 60 gig internal HDD and 1.5 Gig of ram a huge improvment
thanks again for shareing this
I ordered the MK3008GAL from ebay but I really cant see how the hell I can make the cable plug in the hdd.
Its a zif drive ok, looks ok but I cant plug in the existing cable. Also since the cable is symmetrical, which is the right way to plug it?
please tnkgrl or anyone else help me
Anyone manage to use a HITACHI 4200 RPM disk on their AA1? Please confirm…It is a Hitachi Travelstar with zif socket used by ipod 5g model… :( I’m having difficulties making it work…
@Flo – I have the exact same problem you do. This is the 3rd hard drive I have tried and I cannot get any of them recognized. The latest is a 60GB Toshiba that I have the ZIF/LIF connector for but the bios won’t post, it just leaves a blank screen but the drive spins up. Anyone solved this?
same problem here, Have you got a solution ?
*Update* I reflashed to every previous bios and tried 2 separate Toshiba HDDs trying every cable arrangement. How the hell did any of you get a Toshiba drive to work in this piece? Please someone help me!!! I have run out of ideas!
archer, you need a flip cable for hitachi zif hard driver.
Can someone explain what is the purpose of the flip cable with the Hitachi ZIF drive. The pin out between both the SSD and Hitachi drive are the same?
MY FAULT – Why ohh why did I not read the full post!!
Tried to force the ribbon in and in the process broke the ribbon and even worse the ZIF connector on my newly ordered Toshiba 60G 1.8″ PATA. :(.
Can I suggest that we flag the ribbon issue at the top of the page, so nobody is as foolish as I.
For info and detailed shots on the ZIF connection go here – http://www.ji2.com/products/adapter_images/y6401/1.8Toshiba_Drive.jpg
New ZIF cables and drive ordered an expensive lesson learned.. Velcrow
Hi all, I just successfully installed a MK2008GAL that I ordered new for 25$ including shipping. The ZIF cable was a tough fit, but I was afraid to modify it in case I needed to revert back to the crappy slow 8Gig SSD it came with. I found the end of the cable which was originally attached to the mother board was stiffer than the end which was originally in the SSD so I switched the ends. I was also surprised that the contacts on the cable needed to face away from the main body of this HDD, that seemed counter intuitive. Anyway, I just lined up one corner of the cable and pushed it in a bit, then worked my way across the rest of the cable until it was barely in across the length of the cable, then I just pushed harder and bit by bit forced it in. I did try to use my thumb to push down on the connector on the HDD to try to keep it from breaking. I worked slowly and walked away when I began to get frustrated. It took about 15 minutes for me to get it seated and then press the thin black bar down to lock it into place (though it was tight enough not to fall out before). The acer runs soo muc better now, no more pauses to write to the drive. I know 20Gigs isn’t much but it is plenty for this little machine with Linux Mint installed. If you are looking for a linux distro I definitely recommend Linux Mint, its powerful, yet really newbie friendly and works great on the acer, though I did have to follow the directions on the ubuntu acer one site to get the wireless working.
hey, I just got my aspire one and I was thinking, is it posiblr to add more HD, mine has 160g(144g) can I add more to it?
you “could” but you will loose your recovery partition. 160GB format to NTFS only gives you about 149GB, and couple more used up for the eRecovery system. it is in your best interest to keep it if you don’t have backup cd’s
I’m really glad that I installed MK2008GAL. Original cable is used to sand out one end to squeeze it into the HDD. It was just a matter of one to one mapping of the zif cable and sanding out and squeezing it. That took 3 days to figure out. Hugh..
Hi Installed a Toshiba 30 gig MK3008GAl but i cant get it to be regognized by the a one 110. What is it i should do to make it work.I think the cables right,it just wont be seen. Bios 3309 i think.
I tried adding a CF card on an adapter board.
The board shows a red light, but it doesn’t detect.
Pelleplutt : When you open the case, try changing the cable arrangements and turn it on without closing the case until you get it to work. Sometimes when you close the case something goes wrong, like a cable gets crushed or loosened cause of a tight fit it has happened to me a few times.
Lasivian: not sure what you mean by adapter board, are you talking about the built-in card reader, or did you add a ZIF to CF adapter.
I added a ZIF/CF reader.
I think the issue is I need a flipped zif cable.
Now, to find one.
Thanks for the info. I just installed a 20GB Toshiba and had the mod done in about 30 min! Much more responsive now!
I did a low cost upgrade from SSD to 1.8 HDD. Got a new Samsung 40gb from http://www.overstockdealz.com/products.asp?id=HS040HB for $19 US. My AA1 running much faster, no more lag as with the original 8gb SSD.
Okay now I have also tried the 40GB Samsung drive that Jim S got to work but no dice. What revision/model number A110s are you guys using that have gotten a hard drive to be recognized?
I assume yours is the same as my Samsung SpinPoint HS040HB – Hard drive – 40 GB – internal – ATA-100 – 7200 rpm – buffer: 2 MB?
Did you ever get it to work?
I think my Acer is a model ZG5, but I’m at work right now. But the Samsung should work with any AA1 that uses a 40 pin ribbion. Make sure pin 1 of the motherboard follows down the edge of the ribbon to pin 1 of the hdd. MB pin 1 is closest to front of the computer. Pin 1 of the Samsung drive is closest to the three brass connectors on the bottom. Pin 40 would be near the two brass connectors on the opposite side. See photo at the top of this thread. The Samsung drive has double sided jaws and can be flipped over if nessesary to get pin 1 lined up with pin 1. The motherboard connector is one sided only so the ribbon must go connection side down.
could anybody tell me what the best HDD is to replace the SSD with? i have notice some dont work…
Thought I would let everyone know that the AA1 units with the .3MP webcam can be self-upgraded in 15mins or less to a 1.3MP webcam. (No Soldering Required) I will be setting up a website with the processes and part numbers to show you how.
There are 19 screws removed to disassemble the Acer Aspire One (I have the XP hard drive version). There are 4 different sizes of screws among the 14. Somewhere we need to document which screw sizes (short, medium & long black) go where (the 4th size is the silver screw under the keyboard on the right side).
Can anybody tell me if replacing SSD in Acer Aspire One is the same as in Asus R50A? Also SSD 1.8 PATA.
Thanks in advance.
Hi, I have successfully replaced old ssd with CF card and everything works OK. But I have problem with reassembling. Those three plastic “things” that should hold the keybord in place (those under F2, F8 and Break keys) wont pop up. They are stick inside and I can’t find the way how to get them to the right position.. Am I doing something wrong? BTW.. i tried to force them from the other side (but gently of course) and that didn’t help either.. I would appreciate any help.. Thanks.
Well, I had am Apple iPod’s Toshiba 1.8″ drive handy, but no way could I fit it into the A110 so I gave up! I’ve ordered an external enclosure for it now and will use it to house virtual machines.
Anyone know where i can get a replacment Pata cable for my acer aspire one ?
Hi, Very good instructions. I tried the Hitachi C4K60 20gb hard drive and it did not work as others have said, so recommend not to try this hard drive for this task as very strong evidence is not compatible. (I have relegated it to an external hard drive enclosure where it works fine). If anyone got the Hitachi to work would be very interested.
I did get a Samsung HSO82HB 80gb to work no problem but it failed after 2 weeks, which was a worry. A replacement is on its way. When I took out the original 8gb Intel SSD there was an Iron “balun” on the ZIF cable which I removed at the time. Suspecting this may reduce interference or signal spikes I will replace it when I fit the Samsung hard drive to see if that prevents it failing. Has anyone had a Samsung harddrive working for over 6 months without failing?
@SteveJGB: I have been using it since October without a hic.
Great performance improvement mod. Inserting ZIF (HIF!?) cable in 60 GB Samsung HS06THB ($60 on eBay) a bit tight. SSD seems to be a promising technology, but is still in its infancy, ridden with problems.
I got the Hitachi C4K60 20gb to work after all. I got a “flip” zif cable off ebay and it fired up.
this has the exposed wires facing the other way at one end. Certainly could not get it to work with the original ZIF cable that came with the Acer. Works very nice, though not at fast as the Samsung
Do you have any more inf on how did you do it i have the same hard disk that i got out of ebay and i would like to get it to work with a acer one with a crappy 8gb ssd please could you post some pics
Well,do the files on the original SSD drive are lost?
I.e. do I have to install Windows XP(i know it suxx,still) after the mod?
@Dizwix The files on the SSD are still on the SSD, The files that are one the HDD (Hard Drive), if there are any, are still going to be on it. So if you have an empty Hard Drive logic dictates that you will have to install an OS again whether it be Windows or Linux. Now if you get a hard Drive that already has an OS on it you may not have to install it, but it is always recommended to have a clean install with a hardware change. Hope this helps.
And do the OS consider that there are one or two hard drives?
@DizWix I am not sure what you mean. OS is an Operating system (Windows, Mac, Linux, etc). I don’t think there is enough space in an aspire one for 2 hard Drives.
If you are asking if it matters that there are 2 hard drives, then the answer is no.
No,i asked if Windows considered that there were two disk drives (C: and D: i.e)
Hey guys is it impossible for a 2,5″ inches hdd to fit in?
Can I upgrade the aspir one A0A 110 HD to 2.5″ harddrive?
@Fot and Earl Davis: Please read the blog. These links are from this page.
@Dizwix: you mean partition? if so, yes it can be done. You can maybe put to physical drives in but it will be a tight fit.
After searching some more try these as well:
I swapped out my SSD with a 60gb Toshiba MK6208GAL drive but its not recognizing it. After numerous tries, i thought i damaged the original cable so i ordered “FPC ribbon cable for Toshiba 1.8″CE(ZIF) HDD” from ebay and when i tried those, it’s still not working.. What should i do? I tried the SSD again with the original cable and it’s working.. I’m out of ideas. Any help would be appreciated.
Have posted above – same thing happened to me – can anyone confirm that they have had success using a cable from Ebay and if so which cable – there is a flip and a non flip cable on Ebay
I just recently bought an acer aspire one d250 and after reading your guide on integrating bluetooth I wanted to do the same but I have a slight prob that I wanted to know if you had a solution for so here it is:
I have a broadcom BCM92045NMD BLUETOOTH MODULE from an parted out HP notebook, problem is that the module has an 8-pin connector with cable and the aspire one has a 4-pin connection, my question being is there anything I can do with that or should i just go buy a usb one for easier install?
any help is appreciated
What you need to do is have the laptop open have and have access to the hard drive and mobo zif port, then keep checking different cable combinations on both sides. Toshiba has a different cable type then the original cable that comes with the Aspire One. Try flipping the cables and try different sides.
I think the BCM92045NMD takes extra power with the extra 4 pins, Its easier and maybe cheaper to buy a new usb bt module. From what I understand it seems you need to buy a different cable to make the device work, and you will also have problems with drivers there is a serial lock on these chips so will need to make the chip believe that you are using a HP and not an Acer.
um i have a question how do i mod a Acer Aspire one (the ones they sell at radioshack) from HDD to SSD?
Please could someone confirm if a Acer Aspire ONE will work with a TOSHIBA MK6006GAH 1.8″ 60GB 50pin ATA IDE HDD? I see plenty of those on eBay for ok prices.
Before I commit I just want to make sure it works and if I need anything else to get it working, like this flip cable I keep hearing about.
Thanks in advance
From what I understand this hard drive requires a different cable than that which is received with the Aspire One. Note: I have not personally tested it.
I am using this:
Ok thanks, I’m going to get a Toshiba MK3008GAL to play it safe.
Now do I need a new cable when I get this drive? If so could someone please just tell me the type I need so I can buy both items at the same time :)
Again thanks in advance.
Hi – With regards to changing the SSD drive in an ACER Aspire One netbook with a 1.8″, 5mm thick HD there are quite litterally dozens of people who have tried and failed, the majority of failures seeming to be when connecting a HD with LIF HD connection and not ZIF eg – the Toshiba GAL HD Series.
I purchased a Toshiba MK3008GAL HD to replace the SSD in my Aspire One which has been checked as working using adapter through a USB Port.
From Ebay I purchased a 10cm ZIF to LIF ribbon cable. The thin ‘White’ taped end of ribbon cable fitted into HD and ‘Blue’ taped’ end into
Aspire One Mobo, but BIOS does not recognize HD. I have tried re-flashing BIOS, removing BIOS battery for 20 minutes, connected ribbon cable in different ways and still no HD BIOS recognition which raises the question as to whether anybody has successfully connected a Toshiba ‘GAL’ series HD with LIF connection to their Aspire; affirmatively, how? Which way up did ribbon cable connect to Mobo and HD?
Is it connected up as per photos above?:-
Janie needs your help please.
i also used a toshiba HD (MK6028GAL) with a LIF connector and i recycled the cable that was connected to the SSD. you just have to use sandpaper and reduce the thickness of the blue plastic stuff at the end which connects to the HD. worked excellent for me and bios recognized my HD first time!
How were you able to get it recognized with original cable? I tried it before but didn’t work. ordered zif to lif cables from ebay for toshiba zif drives but still didn’t work. Did you reset your bios to get it to work?
I have done a few hdd replacements but only the upgrade tyoe never a switch such as the ssd to HDD on the aspire. Will a SAMSUNG HS060HB 1.8″ 60GB ZIF CE PATA 2MB Hard Drive also work? and what is the disadvantage of only a 2mb vs the 8mb?
it was nearly plug and play. after i worked on the cable and made it fit into the lif connector i booted to see if bios recognizes it. and it did. i read somewhere that i can’t damage the hdd by putting the cable in in the wrong way. but that would have required much more forcing than the right way. so it worked without any problems.
i have had more trouble to get the system to add the full size of the drive after i restored the backup i made from the ssd.
oh… and i have bios ver.3305
Hey i have a aspire one that actually has a real hard drive. sata maybe i believe. can i upgrade?
@Ellias: max you can go is 500GB with sata, and yes you can do it.
Yes my model is the ZG5 and it has a 160gb HDD drive. What is the size of the internal hard drive that i have to buy to be able to upgrade the amount of space?
The N270 Model will accept SATA.
The Highest you can go is:
but anything on this page that says sata will do:
If you are installing a Toshiba 1.8″ drive into your Acer Aspire One, such as HD Model MK4007GAL or MK3008GAL or MK6028GAL which all have a LIF ribbon connection point, I would suggest you purchase a ZIF to LIF, 10 cms long ribbon cable from Ebay.
I tried to connect a ZIF/LIF ribbon cable exactly as per photo at start of of this URL -ie- :-
but could not get the HD to be seen by bios; furthermore, the white plastic LIF end of cable would not easily go into HD.
I then examined HD LIF connection socket with magnifying glass and decided I was connecting cable the wrong way round, so I turned hard disk over ie. in such a way that you would be able to partly see HD label in photo and all worked fine, furthermore the LIF cable now slid easily into HD connection socket.
Other than turning HD over, connect exactly as per photo, including folds in ribbon cable; it worked for me, so if you are having trouble, give it a go.
Whether this advice applies only to Toshiba, LIF connecting HD’s I don’t know.
So says Janie
plz… take a photo and post it… thx
Very interesting, thank u very much.
I installed a samsung HS082HB and all seems to works fine, BIOS recognize it BUT when I try to install an OS it crashes and after reboot hdd “disapears” a while (3/4 starts). BIOS is flashed with the last version. Someone has similar problem?. Someone knows why this happens?.
probably bad CD source. try making another USB installation with another CD. or try downloading Ubuntu or any LiveCD Linux distro. Run the liveCD to see if your harddrive works.
Loads of us had problems with the cable into the 1.8″ ZIF drive. I read an article about installing hard drives in an IPOD and it gave me a clue. Like everyone else I found the SSD cable was too thick for the Samsung Drive. Discovered that some are .35 mm and others are .22. Bought a convertor kit which contained both cables from a UK company. Ordered last Friday very late and it arrived today, Tuesday. Cable goes INTO the end of the ZIF socket on the drive (this is not normal on most ZIF sockets in laptops. I had to turn it over so that the contact side of the cable is the same way up as the circuit board side of the drive. In other words the contacts face towards you as you insert the cable in the drive. This was not the way you naturally expect. Tnkgrls video was brilliant but it might be worth making one showing inserting cables into ZIF 1.8″ drives. Anyway I have re-assembled my Acer Aspire One and the bios picked it up straight away once the cable was the correct way round. The convertor kit that had the cable I needed cost around £6 including delivery and I now have a circuit board which allows me to install an 1.8″ drive in a standard PC for wiping, testing, formatting etc. Hope this helps someone…Now to install Windows 7 trial.
Could you please tell me who you got converter kit from?
The ZIF/LIF cable for my MK2008GAL arrive today, tried booting, the aspire one can’t detect the 1.8″ HDD. I don’t know what I did wrong… Is the ZIF/LIF cable suppose to go all the way on the HD slot? Mine only goes up to the middle and locks in place when I lock it with the black pastic flap. Is that right?
As with many others here, I did this mod and had trouble with the zif cable. The one in my acer was too thick for the used ipod drive I bought. Found a guy on Ebay who was selling a couple different versions of zif cables and that solved the problem.
My restore disks would not work with this new hard drive – I do not know why. I had to use a copy of xp pro that I had laying around and then run updates for 2 days straight to catch it up to sp3. All in all, it was worth it.
I do wish the video showed the details of the zif cable, though. That would have proven helpful for me.
Which cable did you get and did it all work?
The ZIF/LIF cable with Toshiba MK6028GAL 60gb. Correct way.
Hi there, a dumb question. where did ypu connect the ZIF cable to the Samsung HS06THB, front side or under the black flap?
This is my third post I don’t mean to flood the thread but if you know why a black screen is all I have when I connect my toshiba Mk008GAL hdd…
I m desperate it has been for a few months that I haven’t use my AA1 because of that.
I need help !!!
Solved all my problems thanks to these comments.
black screen —-> need to flip the ZIF LIF cable
bios don’t recognize toshiba hdd —> do not forget to lift up the tiny black bar on your hdd connector….
Thanks to all of you
September 2, 2009 at 8:01 pm | Reply
The ZIF/LIF cable with Toshiba MK6028GAL 60gb. Correct way.
Many thanks hellnano
I have the samsung hard disk which I can connect and using the 10cm cable from EBay it is now seen by the Acer while disassembled – which is a big step!
However the connection seems very fragile – when I put it back together does not see it – assume cable has moved – any suggestions?
I also have one of these ZIF CF Card adapters
Any ideas on what do I need to do to get it to work? Same connector??
Thanks to all for your help
September 6, 2009 at 8:34 am | Reply
do not forget to lift up the tiny black bar on your hdd connector….
Thanks to all of you
Were you able to completely re-assemble it and all worked OK?
yep… Full working aa1 with Toshiba MK6028GAL
Thank you, saved my step daughter’s computer… ;-)
Will am 8mm thick PATA hard drive work???
what do you mean by lift UP the little black bar? in my case lifting it up loosens the cable.
my bios can’t see the hard drive, but paradoxically once i’m booted into my operating system, i can access and format the drive!!
what bios version are you guys using?
Lift up, put the cable then, push down the little black bar…
thanks hellnano, it seems that’s what I was doing :)
have tried ordering a set of flip cables as suggested somewhere above – will see if that helps!
September 2, 2009 at 8:01 pm | Reply
The ZIF/LIF cable with Toshiba MK6028GAL 60gb. Correct way.
Hellnano: I don’t believe it – I got it to work…
BUT the hard drive disappears after about 15mins!!!
Switch computer off for a few minutes and its back… again for about 15minutes???
check the cable again…
Hi All, I ordered the right cable form ebay, it came from China. I had the same trouble with putting the cable in HD the right way. I am useing a scandisk cruzer to try to put a OS on the computer, the bios sees the new Toshiba 60gb and sees the thumb drive I have about two days invested and can not make it happen. Any help would be greatly appreciated.
Got it to work with the drive listed on the site. I had to order a ZIF/LIF cable to get it to work.
Update on my progress.
After following hellnanos advice got disk to work.
Installed Windows 7 with some difficulty with booting from external DVD drive?? Anyway after a few goes got it to install.
I have been installing programs and general playing around for a few and it works perfectly – no crashes, no disappearing disks etc? Speed very acceptable – camera etc all work.
Thanks for everyone’s help
the best OS for our AA1 is the tinyXP from Ron[nl]
search and u will find.
hi all, could anybody write me down which type of additional memory is most suitable for upgrading this notebook? I mean producer and so on …
read and see the video of part 1
I need some advice.
Does anyone know if this harddrive will do for the aspire one ssd to hdd mod?
SAMSUNG 1.8″ SATA HDD 120GB HS122JF X300 X301 2730p XT2
Thanks in advance.
I have the same hard drive as you. How did you secure it in the case? What specific adhesive pads did you use, and how many/where did you put them? Only attached to the bottom of the case, on just one side of the drive?
This drive is one of the 5mm thick ones. Anyone else with suggestions? I’d like to get this secured/fit right the first time so I don’t have to disassemble again.
Incidentally, I have one of the adapter cables ordered but it’s coming from Hong Kong and I’m not sure I want to wait… may take the sandpaper approach.
thanks for your videos, they helped me a lot disassembling my Aspire One. However, I’m not so lucky with installing my 1.8″ hard drive, it does not seem to start at all. There is a more detailed description and a few pictures in this board:
Any help would be appreciated.
just buy the 10 cm. ZIF/LIF cable.
it’s the only solution in this moment.
I followed hellnano’s instructions and bought cable from EBay for Samsung drive – disk held in with double sided squares. (I killed original cable!- easy to do)
I found on startup Samsung does not always appear in bios – left Aspire bit disassembled to play with it.
However once I got Windows 7 installed – took a couple of attempts all works fine now.
Most problems relate to the type of cable ie needs to be 10cm (I think ZIF/LIF??) and needs careful folding to ensure no pressure on the connection and of course its orientation when cable inserted – see hellnano’s photos – they really explain everything
If you refer to this photo…
…you will find that hellnano’s setup pretty much looks likes mine:
Does this similarity support the assumption that I broke my cable?
It looks like your cable may not be inserted far enough?
I agree with chrisd. I think the cable needs to go into the hd connector farther. I had a similar problem w/mine. I ordered the flip cable from ebay (the chinese version) and received 5 cables. It was fortunate, because I ruined one learning how to insert it. I couldn’t get the cable to go in far enough (bios couldn’t see the hd), so I used needle nose pliers on the second one. I know that sounds rough, but it worked. Hold the tip of the pliers with your fingers of the other hand to guide it straight in – if it slips to the side, it’ll bend the cable. I could actually feel the cable bottom in the connector. The hd powered up, and has been running great since. Wow, what a difference in speed over the SSD. This is now a respectable little box.
hi, i installed the toshiba 120GB drive but i am experiencing issues with cold starts. drive shows up fine in bios but is not then recognised for booting.
if i go into the bios, click “save settings” then it works fine until the next reboot. Any ideas?
this was a fresh xp sp3 build..
bios on v10
which bios do you have?
Just for grins….is it possible to use a 32 GB Flash card as a HD for the Acer to replace Factory HHD? I noticed there are adapters to use a CF card as a bootable device.
BTW, Loved your videos for MOD’s. You make it look so easy…and I restore antique clock as a hobby.
Great post, thank you!
I already have the Model: 0902 AOA 110-BW ZG5 with an 80gb drive, but I am wondering if one of the newer 160gb drives would also fit. do you think I could replace the exiting 1.8 PATA drive with a larger capasity in the same space?
I’m going to try the ram upgrade for sure… )))
All the best,
I got new cables from eBay, now I can clearly hear the hard disk turning up when booting the computer. However, it is still not recognized by the bios.
Could this be because the drive starts too slow? When I press the power button, I hear the drive beginning to rotate. Five seconds later, the bios shows up, saying there’s no HDD installed. Another five seconds later, I hear a click noise from the hard drive that I’m used to interpret as a “I’m now up and running” from the other Samsung drives I use in two desktop PCs. So this could mean that the bios asks the HDD if it is there, gets no response because the HDD is still starting up and thus thinks there isn’t any HDD installed at all, right?
check the cable…
I followed hellnano’s instructions exactly and double checked cable etc
Disk only sometimes appeared in BIOS on boot up.
I thought I would just try installing W7 from external DVD drive
It worked…..well sort of … the installer would stop after about 5 minutes saying no disk found
I just set it up in a corner of my desk and kept repeating the install process.
Eventually it worked got a full instal and have not had one problem with it since!
Bit strange but anyway!
Well, it was pretty much the same for me. The drive was recognized very few times in the beginning, I checked the cable like 30 or 40 times (really) and, at some point, the disk started getting recognized at every single boot attempt. Just installed Windows 7.
Thanks for your help.
Hi to every one i have a modded 110 with a Samsung 60 gb hdd and 1gb module of ram. When i first make the mode i install win xp sp2 and everything was ok till the time i install the sp3.It worked for a while and then it stopped booting showing only win logo. I tried to reinstall xp sp2,win 7,vista but every time the process stopped after the drivers installation process time while turning to the installation selection menu.I try to make a win xp CD with the chipset drivers with nlite but same thing .Also make hdd test`s with many software’s and its ok. The funny thing is that when using the recovery dvd of acer with linux or ubuntu it works fine. I don`t know if i am doing something wrong please any ideas?
BY FROM GREECE
Have you tried running FIXBOOT and FIXMBR from the Windows Recovery Console?
You get the recovery console by booting from a standard XP CD and it’s in there somewhere – but it’s not the ‘repair existing installation’ option – it’s specifically called ‘Recovery Console’.
If you have difficulty finding it, Google for a specific guide to getting into it, it’s been a while since I did it and I use Linux day to day so my memory isn’t so good!
If you are worried about the state of the hard disk [bad sectors etc] you can use CHKDSK /R which will find any dodgy sections andd fix them.
Generally running all three of the above from the recovery console will sort a large chunk of mystery boot problems, although obviously it’s not a golden bullet.
FIXBOOT and FIXMBR *will* cause any Linux/Grub bootloaders to be overwritten however, if that’s relevant to you…certainly is to me!
Hope that helps,
thanks Steven but as i said it nevers go to that win menu.it loads only drivers with that blue screen and after that it stays to a black screen and thats all
Ah, crap, that’s what I get for not reading properly. :-$
I’d suggest fiddling in the BIOS – set everything to default, set everything to the lowest, or most basic settings [for example, turn off the option that allows it to use the SD card as an extension of the internal storage, etc. It’s possible it’s one of those things that are causing Windows to break at the setup section; Linux tends to be more flexible in that respect!
Incidentally, if you don’t *need* Windows, have you tried just using Ubuntu? I’ve installed 9.10 32bit desktop edition on my AA1 and everything works rather well…
Can somone send me a flip cable. i dont feel like buying and waiting for it to come from china or hong kong. thanks
1 answer, NO.
Buy your own cable.
I will pay for it. Just wanted to buy from the us. THANKS!
hi I have a problem with my Acer aspire one
I were update the bios and the power disconnected durring the update!!
now the netbook not work at all, I prees the power and noting happend!!
any help please
do I need to earies the bois and how?
Here your solution.
thank you hellnano for respond
I tryed this soluyion it did not word…
my Acer not work at all, even I press the power key but it did not light.
do you think I need to remove the bois from the mother bord and change it?
Sure, this don’t help? http://macles.blogspot.com/2008/08/acer-aspire-one-bios-recovery.html
READ it carefully, follow step by step and try it 4 or 5 times.
Take pencil and paper, make a list of the steps, and check step by step.
And Don’t forget about “make sure both battery and AC adapter are connected”
Hi all, I installed a 60GB ZIF Toshiba HDD1724 4200RPM 2MB in my Aspire one netbook. I had all the problems everyone else has had hooking the old cable to the Zif drive. I ordered some zif-lif cables and it all went together fine, it didn’t run long before the drive failed. When I received a new drive all went well and I decided to use Ubuntu on this computer. I learned how to make a USB thumb drive boot as the netbook does not have a cd player. The computer is now running nice
Thank you; you did an excellent job on showing people on how to upgrade the Acer Aspire One.
Thanks to you I now have a 250GB hard drive with 1.5 GB of RAM in my Acer Aspire One 8.9. The next thing I will add is a 3G connector for added internet connection capability and a blue tooth.
Got a newbie question: once I take out the SSD, how do I boot it to install windows? Will it boot from a USB flash drive or external CD-ROM? How are you getting Windows onto the PATA hard drive? Thanks for any advice.
from a usb flash drive. (google)
hi I have a dead Acer Aspire one
I need the full bios version
who can help me to get the whole virsion not the update??
http://macles.blogspot.com/2008/08/acer-aspire-one-bios-recovery.html if doen’t work go to an Acer tech support service
Im about to do the mod. I only need to upgrade to a 20 gig hard drive and ill use a flash drive if i need more room. I found this on Ebay. Does anyone know if this upgrade would work?
HITACHI TravelStar 20GB 1.8″ Hard Drive ZIF C4K60-20 HD
The Interface is Zero Insertion Force (ZIF/LIF) connector.
The Interface connection of the hard drive is the male ( pin ), not the female ( hole ).
Please let me know b/c im about to buy the hd.
Also as an alternative to the mod could I run xp off an external usb connected harddrive? what one would you all recommend?
where’s do u place the foam tape?
from the video it shows some sort of piece of plastic coming from the bottom of the netbook toward the new harddrive. The foam tape would go over that plastic bump to cushion the harddrive when they touch each other.
Thanks for this neat article.
I had been looking all over the internet for info about how to install a PATA drive on my Acer laptop.
This really healped me, so yeah thanks :)
thanks TNKGRL for a fantastic mod on the acer aspire one, works perfect with samsung 60 gig hdd plus another 1 gig memory. many thanks rob
I have my aspire one 110 running with a 60 gig hd and ubuntu 9.10 on it, where can I find drivers for the camera and the card reader?
i’ve been trying to upgrade my acer with 30GB Hitachi 1.8″ hard dive but with no result so far. I’ve been using orignal SSD cable and another ZIF cable which I got with hard drive external usb case but non of them worked. Hard drive has not been detected in bios. Hard drive is OK because it works with external usb case and windows on other laptop detects it. Cables are OK as well because my acer is working now with 8GB SSD card and it’s been detected in bios. Has anyone managed to make this laptop working with a hitachi hard drive? Any ideas? Thanks for your help in advance.
The Samsung 1.8 drive has a latch on the zif connector. This is tiny and I missed it. You have to open the latch carefully to insert the ribbon connector then close it again.
See this pic http://users.rcn.com/tmtalpey/Fujitsu/ZIF/ZIFadapter6.jpg with it open
and this http://users.rcn.com/tmtalpey/Fujitsu/ZIF/ZIFadapter7.jpg with it closed.
Nice mod tnkgrl. Yet to put it back together. Wish me luck.
I want to replace the SSD with a HDD. The problem now is to choose the HDD. My two options are:
The main difference between them is the drive interface. The first has a “Parallel ATA (ATA-7)” interface. The other (MK8031GAL) has a “Parallel ATA (ATA-4)” interface.
I read, the ATA-4 is an older interface. But the MK8031GAL has a bigger buffer size (8MB vs. 2MB).
In previous replies, I read, that the “MK6028GAL” works ok in the Aspire One.
But will the other drive still work (MK8031GAL)?
I hope somebody can help me here!
Your instructions, video and pic are the business (awesome as you might say Stateside). I’ve never taken a laptop or a netbook apart and back together again before but I’ve done it now thanks to you.
I got hold of the same model 1.8″ SAMSUNG HS06THB 60GB ZIF PATA 5MM Hard Drive as you used, from ebay and a 1gb ram stick from Crucial.com. After a bit of trouble with the ribbon cable (trashed the original so had to get another 100mm cable off ebay) I finally got it fitted. Used a bit of gaffer tape (duct tape to you) to stick it to the mobo, another bit as padding on that bit of plastic sticking up, and another bit of gaffer tape to hold the ribbon cable down. Put it together and in the bios it’s recognised first time. You made it simple for a noob.
Installed Ubuntu Netbook Remix 9.10 and lots of space to put other distros on.
Keep those mods coming! And thanks so-o-o much.:o)
cool. too bad they are so expensive
Thanks tnkgrl for the awesome tutorial!
I managed to get the SSD replaced with a Samsung HS06THB 60GB 1.8″ drive. I took me almost two days to get it working though, but I managed to get the netbook to detect the drive, and install windows 7. Plugging the cable into the hard drive was the difficult part. It has to go into the LIF connecter just right, straight, and as deep as one can get it. I used needle nose pliers to force it in (carefully).
Funny thing: Used the netbook for about half a day when suddenly it went dead, and now it doesn’t want to power on again. I’ve seen this happen before if the laptop touches the motherboard (at least I think this is what caused it). I padded the hard drive at both the top and bottom so it doesn’t touch anything before closing the case up, so I don’t think this can be the cause.
Did this happen to anybody else?
Guys please help me!!!
I have got, the SAMSUNG HS082HB but all the cables from e-bay not fit in the slot!!!
Please if someone have the same HDD, tell me what cable i must bay!
Thank’s for your attention!
I would suggest opening the thing again, and running it out of the case. case touching the mobo doesn’t affect it. Static electricity is something that electronics don’t like, although this damage is almost instant. what did you pad with?
I opened the case again, and fiddled around with the cable between the hard drive and the motherboard, and it started working again. Closed the case, and it is still working!
Now I’m stuck with another problem: If I plug in earphones in the earhpone jack the sound is still played through the laptop’s speaker. Maybe I didn’t connect the cable that runs from that part of the computer to the motherboard properly. I’ll open it… again, and have a look.
Yes, that is a good idea, it seems like you are putting too much pressure on some of the cables. I would make sure all the cables are hanging/stuck loosely with sufficient space from the case and Padding.
Best of luck.
Done the memory upgrade and just done the HD one as my SSD was USELESS. If you have not witnessed the SSD you cannot imagine how awful it is. Even after tweaking windows it was un-usable. Just starting to load windows 7 and all going well so far. Re: “L-shaped” lug under the motherboard, I found you DO need to remove this with a 5mm HD as otherwise the pressure of it and the sticky-pad either side of the HD will stop the HD spinning up when you screw all the bits back together (fascia and keyboard and back screws)
Thanks tnkgrl… another satisied customer!
My Hard drive just died, too many bad sectors. I failed to notice that I was killing my drive myself. every now and then I would get a clucking sound when I typed. I didn’t give it much thought at the time.
I wish to warn everyone, if you are getting noises as if the fan is being hit when you type then it is possibly the hard drive.
I’ve tried and tried, still no luck. Have the Toshiba MK3008GAL, and it is more than disappointing after waiting almost 2 weeks for the ZIF/LIF cable to come from China, still no joy. I don’t get it, just a black screen. The Hard Drive light is on just as soon as I press the power button. Can not get into BIOS, just a black screen. Anybody, please help. Thanks.
hmm @gr8aussie please boot w/o harddrive to see if your Bios is alive.
After that I want you to fit the cable in all possible combinations (leave the keyboard out or if you want plug it on but don’t close up the netbook so you can press f2 to get in).
Then I want you to respond with results. good or bad.
Thanks for your reply, boots into BIOS with no hard drive, no problem. I have tried every way I can think of, and 3 different cables. Worse, I just went and bought a used ipod classic to get the hard drive. This one is 120GB. So if I dont get this working, I should have just gotten an ssd. The 120gb drive doesnt show up at all. Different than the 30, which would black screen with the drive activity light on…and on, stuck. Again, disconnect everything and BIOS is fine.
I forgot to mention if your bios is dead then give it in for warranty and hope they don’t realize you messed with it. Ofc, I am assuming you have warranty.
Furthermore, what I mean by fitting the cable in all combinations is to try it other way round then turn the cable around and try both sides again.
The problem with the Zif socket it doesn’t have an indicator of where pin no.1 starts and leaves you guessing.
UPDATE- Success! The 120GB hard drive is recognized! WOw, I was about to give up, wasted money and time. So after fooling with it my conclusions are the used 30 GB I had is no good. The 120 took a couple times to get it seated right, but Windows is installing now. Thank you to every one here who has helped.
Maybe I spoke too soon. Windows 7 setup is saying that it cannot use the drive. It is showing as unallocated space. Exactly, it says:
Windows cannot be installed to this disk. This computer’s hardware may not support booting to this disk. Ensure that the disk’s controller is enabled in the computer’s BIOS menu.
Sorry to flood the forum, am updating as I go. Now I am back to feeling not so sure about anything. I can get the 120 recognized in BIOS, but cant get anything installed on it. Maybe it has to do with partitions or lack of them, format or being initialized. This drive was taken straight out of a working ipod. Music is on it. Maybe that has something to do with windows setup failing, i don’t know. So I tried the 30 again, ONE time, I saw it in the BIOS. put the keyboard back in where i could install, nothing. Disappeared. Tried again and again, it’s gone. So I remembered someone posting about it not showing up in the BIOS but being in Windows setup. Sure enough, The 30GB is there! I can see the drive in Windows! But guess what? Can’t install to it, just like the 120GB drive. If anybody knows what is going on, Well, WOW!, I would be impressed, thankful, and very freaking HAPPY!
gr8aussie are you closing the case and then installing it.
This happened to me, there may be a clearance issue, too much pressure will not let the drive spin and you will get such an error thats why I asked you to keep the case open.
I’ve tried it every way. With case open and drive hanging out of the side. Several times.
Hmm, try the original SSD drive?
Does that still work?
Maybe the cable is f’k’d up?
Try the 30GB in you Ipod?
Boot a Linux Live CD.
I recommend Ubuntu: http://www.ubuntu.com and download Ubuntu. Not the Remix you may get that once you complete the below, but for now, it will be easier to use the full fledged Ubuntu.
Please try this with 30Gb and 120Gb as I don;t know if one of them is bad or not, I have never used SLAMMP
Ubunutu is much easier to use. From there enter Apps-> Accessories->Terminal
in the window Type ‘sudo apt-get install gparted’ without the quotes
Once its done installing goto System -> Admin -> gparted.
Look for your drive and format it to fat32 and save changes.
Restart and try to install windows unless you start liking Ubuntu install that it is a very good and easy to use OS.
Thank you, I would never have thought of linux. I do knows that it is not the cable because I bought a 3 pack and tried all 3! As soon as I get home tonight I will try formatting with a linux boot cd. Thanks again, will post the results.
Tried gparted with ubuntu. Gave errors. Couldn’t format, nothing. I tried several times, all file systems and size. Nothing matters, Can not write to the disk. Tried Windows DiskPart, couldn’t do anyhing either. I really am thinking it’s because it was used in an ipod. Problem is ipod no longer works for me to put it back in. There is a Windows based program that will convert ipods to Fat32. Problem is, you have to have the working ipod, not just a hard drive. Thanks again for your help.
@Saheb, is there anything left to try?
@gr8aussie sorry I was busy yesterday. Ipod uses HFS+ or FAT32 by default.
Gparted supports both.
I would say the hard drive you is bad. Could you tell me what error message you got. Did you try both hard drives?
Please give me the exact error message.
By the way did you see the size of the disk on Gparted was it correct?
I am thinking maybe you selected the wrong drive, as LiveCd makes a virtual Drive and Gparted will select that as default first.
You can change your Hard drive selection from the top right corner. It will be listed like: /dev/sd*
where * could be a, b, c, etc.
Hello, Thank you once again. I will try as you say this evening after work. I do know that I tried the correct drive, the size was 111.2GB. I will try again tonight and post the exact error. I believe it just said it was unable to complete the process. I will also try again with the smaller drive. Thanks!
for the 120, which shows up in bios,
the error is this:
mkdosfs: failed whilst writing reserved sector
for the 30, which does NOT show up in BIOS,
it formatted the drive. Windows still can not install to the disk, It can see it though. I guess it doesn’t matter because if it’s not in the bios then it would never boot. What are the chances I have 2 bad hard drives? And I know for a fact that the 120 worked when I took it out of the ipod. Maybe I damaged it removing it. I just hate to shell out $ for a THIRD drive not knowing if it will work!
Hi, the 8GB SSD on my Acer Aspire One A110 died and I’m debating whether to replace it with another SSD or a 1.8″ HDD like the Samsung that tnkgrl used. I’m looking at this Transcend 16GB TS16GSSD10-M which I found on newegg for about $54.00. It looks like a drop in replacement for the Intel Z-P230. The thing I’m wondering about is transfer speeds. The datasheet for this SSD says it supports UDMA mode 5 which is 100 MB/sec. The datasheet however only shows benchmark data for UDMA4 mode with what looks like about 45MB/sec reads and 12MB/sec writes. I understand that the Intel Z-P320 maxed out at UDMA4 and it made me insane when firefox would lock up the whole system for multiple seconds reading / writing it’s sqlite database. Would I get a significant performance boost going with the Samsung HDD compared to the Transcend SSD? I don’t care about disk capacity as much as speed and durability.
@gr8aussie: Sorry to say the 120GB has a new Home the trashcan.
As for the 30GB please see https://tnkgrl.wordpress.com/2008/08/16/modding-the-acer-aspire-one-hard-drive/#comment-13308
Your 30GB drive sounds fine to me.
@SailorBob: It is really upto you. The new SSDs are faster than the HDDs but I doubt the one you are looking at is one of the ones I am talking about.
My friend and I were recently talking about how we as human beings are so hooked onto electronics. Reading this post makes me think back to that debate we had, and just how inseparable from electronics we have all become.I don’t mean this in a bad way, of course! Ethical concerns aside… I just hope that as the price of memory decreases, the possibility of uploading our brains onto a digital medium becomes a true reality. It’s a fantasy that I daydream about almost every day.(Submitted on R4Post for R4i Nintendo DS.)
I got a 1.8″ 80GB ZIF PATA HD Toshiba MK8009GAH. I successfully connected it to the laptop. then I tried to install windows 7 on my acer aspire one zg5. the windows 7 installation recognises the hard drive, but would not agree to install on the hard drive. because the laptop won’t agree to boot the hard drive at start up. Please, what can I do?
blazinhot06: so you are saying the setup detects your hard drive but bios doesn’t?
In response to the above question download active boot disc creator off the web its free transfer it to a usb drive to boot from. Then format ur new drive.
Btw I did the mod and it works great. If anyone needs a hitachi flip zif cable then send an email to email@example.com and we could negotiate something if u got paypal. Its alot quicker than ordering from china
Hey, thanks for a good side. I purchased a samsung drive. Bios finds the disk. but when I try to instalere xp or linux. I get only up to ensure that it can not find the disk. I have reset bios. flash bios. tried EVERYTHING!
@Espen Make sure the cable is in properly, I had a Samsung drive as well, I had jam it in well.
I bought the same Samsung HS06THB ( brand new ) as tnkgrl and got some ZIF cables off ebay which have blue on both sides and I’m having a murderous time getting the cable into the drive. I’m inserting with the blue towards the bottom of the drive with the cable pins towards the top / label. I seem to have gotten it in ( not sure if it’s in enough ) and the drive doesn’t spin up and isn’t recognized. Using bios 3114.
Well, flipped the HD side of the cable worked it in and now I’m installing Ubuntu… looks good.
I can confirm that the MK3008GAL works. I used a flip cable and the hd was detected right away. I’m running Windows 7 ultimate on it right now. It is sort of unstable for me though. I get BSOD once a while out of nowhere. I’m not sure if its the hard drive or something else. I find that the cable must be folded so that there is not too much tension at the connectors. When you put the case back on, pressure on the cable and hard drive will cause problems. Just make sure everything is as stationary and rigid as possible.
If anyone know why I’m getting BSOD, I would appreciate an answer.
Thanks guys. I use BIOS v3309. do you think mine is a
I will try to downgrade the bios and do the installation.
blazinhot06: you have not answered my earlier question, but never mind.
Can you try to open your case again, install windows again while leaving ur case open.
Leave it open and try different cable arrangements till you get it to work.
Remember to flip the cable both horizontally and vertically.
@ Saheb. I tried that many times with different cables. the BIOS doesn’t support the Laptop to boot the hard drive. It doesn’t even recognise that a hard drive has been connected. But when I start the windows 7 ultimate installation, the installation recognises that a hard drive has been connected, it even shows the name of the hard dirve toshiba MK8009GAH and can format the hard drive. but, when I click on the hard drive name for the installation to be done in it. I then get a message that my computer’s BIOS might not support booting with the toshiba hard drive. do you know what is causing the problem?
I am afraid to buy another hard drive, fearing that I might get the same problem
blazinhot06: can you take a picture of how u connected the cables. It may be that the hard drive is incompatible but I cannot prove that since the specs look ok. If you have another drive lying around i would recommend you try that, but it seems you would have tried that if you did. I had the problem you are having with the first drive I bought it was a 1.5 PATA. I resolved it by getting another drive. The Toshiba you have should work, the only reason I can think of is cabling.
If you read this whole page you will notice they most of them cabling issues.
Stupid question but did you turn off the device before taking out the cable to try different arrangements?
Yes. I always turn off the device before changing cable arrangements. My SSD still funstions perfectly with all the 3 cables I have. two of the cables are new and 1 came with the laptop. I think I would get a new 160gb samsung PATA hard drive. you think that would work?
Love the mod. Internal 3G sounds pretty good but im more focused on my hard drive
Anyways has anyone tried swapping the Stock SSD with a SD (or CF) to ZIF adapter? Probability would be more efficient, Plus SDHC cards are way easier to find.
I’ve just ordered an adapter and SDHDC card to do just that :-)
I considered the iPod HDD option but prices of SD are so relatively cheap now and they’re lighter. 32GB should do me fine. After all, my entire Ubuntu 64bit desktop uses 24GB, which includes 15GB of personal files!
I’ll let you know if it works ok. Waiting on the 1gb RAM being delivered, thought I might as well do the lot ‘while I was in there’.
blazinhot06: I think it is a safer bet to try and get less than 100 GB hard drive, as all the drives that have seemed to work are 30, 60, and 80.
Mike C: Atom processor is a 32-bit processor, you cannot install a 64-bit OS on a 32-bit Machine.
I am well aware the atom is 32 bit, I was simply comparing volume.
Mike C: Sorry about that, my bad.
Thanks Mike C
I did the upgrade with toshiba mk1231gal. It’s visible in bios but I can’t format it, windows doesn’t see it, in linux (ubuntu) I can format it with gparted only as fst but can’t make it bootable. Is there a solution to make it work?
Ovidiu: I think the ZIF interface on this motherboard doesn’t like 80 GB+ storage. I haven’t seen a successful attempt yet.
Sahib: Cheers! I think I will try to sell the hdd and get a smaller one instead…
I bought a 1.8″ SAMSUNG 120GB ZIF PATA 5400 HS122JC Hard Drive HDD. it works perfectly with windows 7. it is fast and doesn’t pause like the SSD that came with the laptop.
Further to my attempt at fitting a ZIF to SD adapter and card in place of the SSD:
Sadly, this didn’t work. Perhaps it was the adapter, system or combination. I thought I had it sorted when the adapter showed both ‘5v’ and ‘SD’ LED’s lit. The bios didn’t pick it up at all. Not even a flicker from the ‘Active’ LED on the adapter. Booting from USB stick, the distro (#! CrunchBang Linux) didn’t see it either, though this was probably grasping at straws :-)
Ah well. At least the RAM went in flawlessly and whatever else, I may have an unuseable SD adapter but I still have a useable 32Gb SD card!
I’ve also hot a Hitachi travelstar (30gb) that is not being recognized in the BIOS. I’ve tried a combination of flipping cables on the HD end, but the disk isn’t even spinning! This is my second one of these HD’s and I tested it and know it works. Any help would be appreciated, thanks!
Ovidiu: blazinhot06 is the first person I have seen with success on a 120 GB HD, it may be something to do with Toshiba drives and Samsung drives. You may notice even tnkgrl used a samsung.
Mike C: is the adapter LIF to SD? or is it a multi interface to SD? what I am trying to say is, can you test it somewhere else?
Nicco: You have to bend it like this
Saheb how will this benefit me? I will try it when I get home.
The adapter has ZIF (40 pin) and mini IDE (50 pin). Or rather had. I removed the IDE for physical fit reasons. I have no mini IDE adapters, so would have had no way to try it anyway :-(
I’m resigned (for the moment) to being unable to make it work. However, I’d appreciate any thoughts as to another method:
Chain-loading GRUB to initially boot from the SSD, then the SD in the left-hand slot? Is this possible? I’ll also ask this on the Ubuntu Netbook Remix forums, the more pooled knowledge the better! Should it be possible, I’m assuming the data transfer from this slot with a Class 6 SD card is faster than the SSD? Obviously I’d permanently tie-up the left-hand SD slot and lose almost all of the 8Gb SSD but I can live with that. Most of my removable media is USB, anyhow.
Nicco: I hope so, by the looks of it you weren’t doing that.
Mike C: http://www.osnews.com/story/20743/Eeebuntu_2_0_SD_Card_Installation_on_the_Aspire_One
I read a good portion of it, This will help if you are willing to invest the time.
Saheb: unfortunately that did not work :\
I have a toshiba and a hitachi drive now…neither of which are being recognized…Ideas ladies and gentlemen?
Many, many thanks, I think this is almost exactly what I was looking for :-)
I’ve sort of skimmed it too (time pressure/work) but can see it will let me do as I proposed.
I’m going to play with it a bit. My desktop Ubuntu Karmic has let me use a spare 2Gb SD (via a USB reader) to write the Ubuntu Netbook Remix ISO, which boots on the Acer Aspire One (again, via a USB reader) just fine, so there’s a start. I have a few days off to go through the GRUB config as per the supplied link to make it work on my 32Gb SD in it’s left hand slot. I’m very confident this won’t be too much of a pain.
Toshiba MK6028GAL + AOA110-Bh
Used original cable.
Works perfectly – and significally faster!
@Nicco: I wanted to ask if you have the Lif to Zif cables, but was unable to post.
@Mike C: NP, Same story wanted to get to earlier but couldn’t post, please tell me how it went.
@varnav: Grats, I believed this was possible, but didn’t have a Toshiba to try, what did you do just jam it in? AOA110-Bh is the newer one right?
Not so good. I can burn the ISO for the ‘live’ version and it boots just fine from a USB reader, running in ‘Live’ mode. When I come to install on the SD, I get errors ‘can’t create ext3 (or ext4) file sytem’. I need to have a good few spare hours to try and pre-format partitions on the SD card via my desktop. Maybe even install netbook remix on my desktop (spare partition or ‘Live’ CD) and from there to the SD card. Starting to wonder if the SD card is faulty.
OK, so a 2gb SD formats just fine as ext4. I think I’m looking at a dodgy card. The 32gb card formats and reads just fine as ext2, FAT16/32 but not as a journalled file-system.
@ Saheb, thanks.
I have just ordered that Samsung 5mm drive that you recommended earlier in this post to add to aspire one. If i run into any questions can i holler at you?
@Domenic sure np.
Yes, I have zif to lif and zif to zif. The drives are not even getting power. I’ve tried many cables. I also recently bought a cf card adapter, and the CF isn’t being recognized by my aao either. I’m thinking it’s a power problem. Maybe a short somewhere or something…
@Nicco I wish the was an easy to test the cables or Hard Drive to see if they are at fault but unfortunately there isn’t. Its more to do with Zif Drives not being popular enough yet. With the rise of SSD drives ZIF may completely die out. Well back to your problem, if your upto it you could get a Zif to 2.5 of 3.5 adapter and check to see if your drive(s) is(are) working.
something like this:
You may find it cheaper.
If you believe its a short look for black soot or smell on the board.
I still think the arrangement of the cable is at fault.
Alright saheb thanks for all your help. I just bought some flip cables because that seemed to solve a bundle of peoples problems. Hopefully that will be the thing that I need!
I recently did this with an 80gb toshiba straight out of an iPod I had laying around re house. I had some trouble trying to slide the connector into the hard drive and read somebody had sanded down the blue tape so I gave it a try after finally getting it sanded down enough it fit :] locked the black thing down and hoped for the best. To my suprise it showed up in the bios first time so I grabbed my USB with ubuntu to format it with gparted but was stopped by the constant errors. Ubuntu shows that it is a healthy drive and I was able to read it and wipe the existing partions off but it’s almost like I can’t write to it because I can’t creat a new partition.
The only think I could thing of is maybe I damaged a part of the cable preventing from being able to write to the hard drive. For the record thedrive worked absolutely perfect when in the iPod so should not be fualty. I ordered another ribbon cable off of eBay to give a try. Any suggestions or anything would be freaking amazing!! Please give me some ideas :]
@Tori: can you post a pic of your sanded down cable, From what I understand the Toshiba and Hitachi are a tighter fit.
If you read the part where he/she sanded it down, you would have also read that it didn’t work for him/her. I also believe you fucked your cable, but you cable may still be feasible.
Try using the the sanded part on the mother board, when I squeezed my cable in to the drive I noticed some of the pins got bent backwards, you can use your nails to straighten them back to their place.
Hey well I later tried to reconnect to the ssd until my cables came in the mail but because I had sanded it it wouldn’t stay in. I grabbed some electrical tape and pit a small strip on and it worked like a charm. Everything works exactly like before. No problems with writing to the disk like I had with the toshiba hard drive. So I was really curious if I somehow screwed up the hard drive so I popped it back into the hardrive and plugged it in the the comp and reformatted it. It worked and I’m just using it as an external now.
So in the end everything works! Didn’t damage anything … The hard drive showed up in the bios and everything so it should be fully compatible but I guess that’s not the case. I’m gonna give it another try when the cables come in. This time with a fully formated hardrive without the seperate iPod firmware partition and stuff and maybe since the cable I’m getting is for specifically toshiba drives eveything will workout
@Tori: Umm, how did you make the drive an external? Arn’t you trying to use a ZIF Drive?
Yeah. It’s a iPod classic 5th gen. When you plug it in whatever space you don’t use for music turns into storage like a flash drive
My 30gb HD is now in full working order and my AAO runs like a charm.
All i needed was a FLIP CABLE, I didn’t want to buy one because it was such a hassle, but it is what did the trick. I recommend anyone who is trying to do this mod to buy the flip cable before anything, as it would have saved me around 3 months and 50 dollars worth of trouble.
Here is one for HDs with LIF:
And one for ZIF HDs:
Thanks again everyone, and especially you TNKGRL!!
I have successfully installed a 60 GB hdd, but upon trying to install the OS (XP ULCPC version) from the recovery CDs, I am able to boot from the usb cd-rom, and get to the point where I am asked for disc 1 that contains XP. It spins up, but never goes past 0% on the progress. The discs are marked “For NAND Flash module only”, which I assume is my issue. Where can I download the iso for the hard drive base AspireOne A150? Google is usually my friend, but has left me empty handed on this one…
The only legal way to obtain a copy of Windows is by purchasing it at your local store or online.
I made the swap with an 80 gig ipod hard drive and it’s recognized in bios but when I try to reinstall windows it says that it can’t access this drive even though it’s listed. New cable from ebay and appeared to fit perfectly. Not sure what’s going on now. Any ideas?
Mike C said:
> Further to my attempt at fitting a ZIF to SD adapter
> and card in place of the SSD:
> Sadly, this didn’t work. Perhaps it was the adapter,
> system or combination. I thought I had it sorted when
> the adapter showed both ’5v’ and ‘SD’ LED’s lit. The
> bios didn’t pick it up at all. Not even a flicker from
> the ‘Active’ LED on the adapter.
Did you ever have any luck with this? I’m having a similar problem with my ZIF2CF adapter; the access LED (both the adapter’s and the computer’s) is always on, but the drive is not recognized by either BIOS or Kubuntu, and the reason I got the adapter in the first place is that the internal SSD has failed, so I don’t have the option of chain loading.
Criptych, what cable are you using? Mine only started to work once i used the flip cable. I also had the solid LED ‘active’ light. Once I got the flip cables, the light turned from solid to flickering, like the drive was actually being read. Hope this helps.
Okay, I was holding out on ordering flip cables as a last resort, but since it seems to have helped others, I’ll give it a try. Thanks.
Good news – it worked! In fact I’m typing this at a fresh install on the new HDD. Thanks for your help! :)
@ Shannon is it a toshiba MK8009GAH 80gb. Mine had the same problem too. Try to get a genuine cable. If it doesn’t work, sell it and get a samsung hard drive. That was what I did.
@Masoyi, Thanks for replying. Yes that’s exactly what the drive is. I got the cable on ebay that said it was for toshiba drives. Is that what you meant by genuine cable? I will price some samsung drives.
hey there i have a Toshiba 1.8″ 80GB MK8010GAH and i cant make the bios find it.if i put the drive it opens up and writes no bootable device found i have buyed toshiba zif from here
can some one help me make the mod work for me
Roulis, check the ebay auctions i posted here:
They are different than the cables you bought.
ok i made it work it sees the hdd boot i cant boot it only shows the usb drive i have the windows on any help
I am ready to help you, set questions. Together we can come to a right answer.
hey there i got my acer to find my drive in the bios but cant boot can some one help me figer out the the error or guide me
@roulis: When you say it won’t boot I assume you mean it won’t boot to Windows Setup?
could you clarify?
i can see that the drive is upand running but cant instal windows it gust cant select the toshiba.i buyed all the lif zif wies that the guys told me in the forum but no boot
I had a similar Issue when I first did his mod.
Keep the Case open and retry.
wot did you do to fix it any tips.wot disk did you use
My problem was that the cables were too squished in the Case so I had to rearrange them so they had room to breath.
any other trik you did to boot xp on it?
I did have another problem the cable was not fit correctly I mean upside down.
Maybe try and flip it?
can anyone tell me how it is I can install windows to the hdd via usb but the drive not seen in bios?
@Jody: Which Drive do you mean?
The HDD or The Flash Drive?
If it is the HDD did you try the above suggestions? I know it is a pain to read all of it but it is repeated question. Which Drive do you have? did you get the ZIP to LIF Cables? please provide more information.
Sorry for my noobish previous post.
The drive I have is MK3008GAL and I did order different cable from e-bay as pointed out.
The reason for my post is that nobody else seems to be experiencing my issue…here goes…
Hook up the drive, not found in Bios, downloaded and tried all the bios`s on acer site, still no drive…but….
The acer flash recovery I made and the win xp flash boot I made both find the drive and let me install to it….
I realy am confused as I would have thought if cabling was the issue how is it both flash drives can find it???
Any ideas,thoughts or suggestions happily welcomed.
Thanx again…. great blog :)
OK let me try and Rephrase your situation to my understanding. You are saying that the HDD is not visible in the Bios, but it is visible in Windows Setup Partition Manager.
If the above holds true, then when you try to install you probably get an error. I will assume you do or you wouldn’t be here.
Can you try and flip the cable?
Maybe there is too much pressure on the cable, can you try and open the case and boot? Try different combinations of inserting the cable to see if it works.
Also Bend the Cable as shown in the picture above, I don’t know why but it makes a difference.
Im going to order different cables, drive still not found in acer one bios but It will allow windows to install…took around 50 minutes….
When I get new cables will let you know, thankyou for taking the time to reply
Nope :( even wiv cables cant find drive in bios….
however found a version of linux called peppermint which seems to be very good on the inferior stock ssd.
my kind of laptop is compaq window 7 the problem i having now is each time i slot my flash in after if i want to remove it will sey error removal what do i do about it.
@chidiebere: please post your query at daniweb.com this is not the most appropriate forum for this type of query.
Please add the following information: What exactly are you are trying to do. Your Laptop model Number. What is the Exact Error Message.
Nice mod, but is it possible to use a SATA II SSD?
Means support it also the SATA II Protocoll?
SATA II devices are backwards compatible with SATA interfaces – they just don’t run at the faster speed.
@marndra: check this out: http://www.solidstatecentral.com.au/store/index.php?main_page=product_info&products_id=337
Thanks so much for the video. I’ve been taking laptops apart for years, but the day before I was going away and needed this one to work it was very nice to actually see somebody doing it so I knew 100% it could be done.
A few points –
I used exactly the same hard drive family as you recommend – only 30gb was a shame, but it was all I could get on short notice. The speed improvement was simply huge although the battery is even worse now…
Don’t do what I did and peel the blue reinforcing tape off the ribbon cable – just gently work at it – you will get it in there.
@Jody: Can you please recount all the steps you have done.
i have an early acer one with 160gb hdd. i lost the c: partition using partition magic to format. now no drive letter shows for the drive in boot setup f12, but does show drive is present. i’m working with a usb cd drive which shows as a: . i want to install win xp. any help would be appreciated. thanks, bob
Hi! Pardon me if this is a dumb question, or has already been asked.. I broke the zif connector for the keyboard on my aspire which came with a 120gb hdd. If I buy one of the ssd aspires can I just swap my old hdd in and change some BIOS settings, or am I being too simple-minded about the whole thing… I’ve been looking for aspire mobos without much luck, so I’m kinda hoping buying the whole ssd machine and replacing the hd (being more careful this time) would be a workable alternative…. thanks!
@mark: If all you need is the keyboard then: http://cgi.ebay.com/Brand-New-Keyboard-Acer-Aspire-One-AEZG5R00010-ZG5-/170394366029?pt=PCA_Mice_Trackballs&hash=item27ac4bb04d
Or are you saying the actual connector on the Motherboard?
As for the swap, kind of but you will need an adapter and it would be waste, Just replace the motherboard. I assume when you say SSD you mean the ZIF Drives and not the SATA Drives.
I am also assuming the 120GB drive is SATA.
Awesome tutorial, great videos! I think I can take my ZG5 apart and put it together again in the dark and without my glasses now. I’m unfortunately in the ranks of those who either damaged the cable (likely) or motherboard (unlikely) or have a bad hard drive (the packaging was very fishy – not quite what I’d expect from a distributor, just bubble wrap around a Toshiba MK6015GAA). Besides which I ordered a Samsung 1.8″ Samsung pata zif 60GB HS06THB (and the invoice also said that) but got the Toshiba (can’t find anything that says they are incompatible, but can’t find anything that says they are either. But hey, it’s an adventure and I’ll have more spare parts in my basement :-)
I wish there was a way to boot from a USB stick (probably no worse than the SSD) to test the rest of the ZG5 that would allow new apps to be added, tried BartPE but no luck yet with USB stick – don’t want to just use the BartPE DVD without being able to add programs.
I have new cables on the way (5cm, 10cm and Flips) also an external enclosure so I can test the drive I got and maybe use it later for the slowest external 8GB drive around with the SSD… I’ll post an update when done. Worst case, looks like the motherboards aren’t too expensive, and this has to work again because I bought the 12 hour battery with the new hard drive :-D
@Kevin McCoy: It supports USB Boot. Try Linux Distros for testing purposes, as it is alot easier to make USB boot disks for them. Here is a popular one.
Follow this FAQ: https://help.ubuntu.com/community/Installation/FromUSBStick#From%20Windows.
Get this: http://unetbootin.sourceforge.net/
and this: http://www.ubuntu.com/netbook/get-ubuntu/download
You should end up with a Bootable USB drive.
Ask Google for Puppylinux. Works perfectly on my AAO-ZG5, from a usb-stick. Light and fast.
So fast I now want to change my SSD-drive. I hoped to find a Pata-Zif-ssd but it seems they are expensive and still rather slow (http://www.dpieshop.com/runcore-32gb-18-zif-ide-ssd-for-standard-pc-5mm-height-solid-state-drive-p-692.html) while the same drive in SATA is cheaper and much faster.
So now I’m here to study how to put a HDD in my machine. Faster, sure, everything’s faster than the original thing. But (I saw this question before but nobody answered clearly) what does this HDD do to my battery life compared to the SSD?
Thanks to all for the useful information found here.
Do you think that Aspire’s crappy ssd can be replaced with Toshiba MK8022GAA: 1.8″ CE HDD 80.0GB? http://sdd.toshiba.com/main.aspx?Path=StorageSolutions/1.8-inchHardDiskDrives/MK8022GAA/MK8022GAASpecifications.
I can buy one for really cheap price (it was in an iPod).
Any help would be nice, thx.
@Esox: it may work but you will have to change the cables.
in the comments on this page it seems the person was not able to get it to work.
So it will be at your own risk.
thx 4 your answer, but i can’t find that comment you are talking about. Noone mentioned hitachi hdd on that thread. Or maybe i miessed that.
I really want to make this mod for my wife (she’s got the aprire…) otherwise it goes to trash and a value price J&W comes instead….
I bought and installed the 60 GB Samsung HS06THB. However, after about 3 months it died completely. Turns out that allot of these OEM drives sold on ebay carry zero manufacturer warranty, so if they die after the 60 days that some of the sellers give you you’re SOL. Both Samsung and Toshiba have the same policy on these OEM drives.
In any case I’m thinking about getting the Toshiba MK3008GAL since it’s cheap, but am wondering what issues are involved as someone above mentioned needing a “flip” cable or a ZIF to LIF cable… Any suggestions?
One piece of advice to people: once you get the drive recognized, boot into one of the Live Linux distros like Parted Magic and do these three things:
1. Turn on S.M.A.R.T monitoring
2. Run badblocks -vws /dev/sda to check the entire surface of the drive
3. Run a stress test tool like Bonnie++ for a day or two
Once you’ve done that check the SMART log for any disk errors.
Thanks, SailorBob! Good advice. Today I got my new Zif cables in the mail from Hong Kong, still waiting for the external PATA case to test the drive separately. Still doesn’t see the Toshiba MK6015GAA, tried both regular and flip cables (10mm – also got the 5mm while I was at it). The original 8GB SSD now works again with a new cable, so I guess the click I heard pushing the motherboard in was the hard drive hitting the plastic (phew). Tonight I noticed that the case on the new Toshiba is a little flaky, noticed that there was separation in a corner when it clicked in place – maybe I shouldn’t have gotten the cheapest one – it came wrapped poorly in bubble wrap with nothing else but the drive. More to follow when I find if it is good or not (hopefully before the 60 days). At least it’s back for now (using it to enter this) :-)
@Esox: Didn’t you say Toshiba? Click on comments and press find
and type MK8022GAA.
@SailorBob: MK3008GAL needs the cables. https://tnkgrl.wordpress.com/2008/08/16/modding-the-acer-aspire-one-hard-drive/#comment-13308
Ohh thanks, i was trying to find the comment in the engadget forum you posted…
@Esox: Good luck on your endeavor please post back with your results. It may help someone else. :)
I found three new Toshibas because the seller didn’t hold the MK8022GAA for me.
The new HDs:
20GB – MK2006GAL
30GB – MK3006GAL
160GB – MK1626GCB
Do you think are they fit in? (One of them of course)
Theoretically they should all work with a cable change.
Why don’t you play it safe and try one of the known compatible drives.
I personally tried and used the Samsung HS081HA. here is the link: http://www.getpartsonline.com/hs081ha.html
For pics http://njabi.net/etc/ from 18012009026.jpg
Thx for your help. Actually I’ve already bought a Samsung MK6008GAH 60GB 1.8″ model to replace that crappy ssd in my Aspire…
I’ll let you know about modding later when it’s done.
Thank you! Your tutorial helped me upgrade the Mini PCIe Atheros AR5BXB63 wireless card that came in my aspire one netbook to an Intel WiFi Link 4965AGN. It isn’t connecting at the full 300mbs, but is still over 100mbs and the 802.11n is only connected to the router at 100/t anyway, so twice as fast thanks to you. This PC is a ZG5 atom N270 has a 160 GB HD and sim reader already installed. Left to my own devices I kept removing the Mini PCIe card accessible from the back for the SIM reader. I couldn’t understand why the Atheros drivers wouldn’t uninstall (maybe b/c i was removing a totally different PCIe). The SIM reader is of no real benefit to me b/c I’m not savvy enough to put it to use w/o paying AT&T $ I’d rather have in hardware for projects like yours. Thanks again.
I have read the specs, and replies, though; I have yet to hear how to replace the hard drive to a normal travelstar ide. Could you let me know if I missed something?
Hi Saheb, tnkgrl and all listeners!
Finally we can change that crappy ssd with Samsung MK6008GAH 60GB 1.8″, following your instructions.
It works like a charm.
Thanks for everyones help.
@Esox: Grats Mate.
After three weeks of success, our aspire one is not working anymore. I don’t know what happened but i can’t turn it on with/without battery. Its fully charged, but when i press the power button, it’s just not turning on… :(
Did anyone of you have the same problem ever?
Hi all,what is the largest capacity 1.8 Samsung ZIF HDD that I can install in my Aspire One, (ZG5) in place of the 8GB SSD that it came from the factory with,
Thank you and regards,
Update to my saga: I sadly warn all to not buy the drive from http://www.mini-laptop-accessories.com. I bought the first on the 16th of September 2010, received it from China a month later (but the wrong make and model, and did not appear to work). I bought an external PATA case to confirm it was defective. Returned it the 18th of October 2010, it is presumably lost in the mail somewhere between here and Shenzhen, China (now two months since returning it)… I just bought another Samsung drive, this time from the United Kingdom. Meanwhile I’m looking at my iPod like a hungry cannibal :-D
P.S. I did check with the original supplier last month, they said they had not received the return and asked for the U.S. Customs trakcing number. I e-mailed them again this month and have not received a reply. Given the shoddy packaging of the original shipment, that it was not the right drive and also defective I conclude that it was a bad purchase. If the seller resolves this I will post an update (and also have a use for the empty external PATA drive case I bought in the process) :-/
acer aspire one d250 1517-…..sry to bother you but i can’t find a straight answer no matter what i put in search……i have seen many pci-e ssd cards on ebay and elsewhere for other laptops…..my ?…are there ANY that i could put in the pci-e compartment on the bottom of the netbook generally referred to as being for a 3-g card ?…seems to me (stupid, most likely)…that pci-e is pci-e…and that there ought to be a way to get a 16 ,32, etc. to work in it…..thank you in advance for your time.-castawaydreamer at aol if anyone cares to reply directly
Hi Thanks for all these posts I bought a Samsung HS06THB
(60 GB) from ebay/China put it in the AA1 (cur some plastic and
used a zif cable from ebay thinner than original one…) the bios
V0.3109 that I had find it directly but when trying to install
Windows XP sweet, it founds 8 GB instead of 60 GB ! and couldn’t
format it W Seven found the right size but couldn’t format it…
errors… I flashed the AA1 bios to V0.3310 (last up2date), nothing
changed I tried booting on Ubuntu:
http://www.ubuntu.com/netbook/get-ubuntu/download on a USB, the OS
works fine from USB, but didn’t found the HDD :-( I also looked for
the low level tool from Samsung :
create an .img disk image boot USB with (unetbootin-windows-312),
the ESTOOL founds a HDD but it says it is not a Samsung !!!! and
refuses to diagnose it :-(( I thing that I have to reopen the AA1
once again and try to put the cable more in the zif, like on one
any other ideas ? Thanks
opened it again, put a new cable ! without forgetting to open the zif black connector on the HDD
and now it works (HDD found with ESTOOL, AA1 opened…) I will try to install an OS…
@Lofti: congrats, although I don’t see your earlier post.
Let us know how it went.
multiboot :-) Seven and ubuntu notebook remix :-)
for the mod
what helped me are the pictures of how to open the ZIF connecter on the HDD and you must have a thin new zif cable.
Thanks to God, I had 2 cables from a previous attemp (buy but didn’t installed) CF to ZIF card which cames luckily from ebay with 2 cables :-)
lot of patience to all who want to do the mod
with 1.5 MB and real HDD, the running speed is there, now the AA1 is a computer !
Congrats on your successful attempt. :D
@Esox: Strange, can you try and open it up and unplug the HDD and boot again?
The only problem I ever had was that I would type and feel the hard drive clicking, I didn’t realize I was killing the drive, and then one day it died.
But I still got it to boot.
Can you elaborate on the problem.
When you charge does the LED light light up?
When you try to switch it on, is there any light activity?
Try opening the case up and switching the machine on, to see what happens.
Please be as descriptive as possible.
I have changed ssd to hs04thb and had problem with it.
first it wasn’t detected, then after few attempts of disconnecting it worked, but i couldn’t format it. mhdd erase and it wokred, win installed, but again there is a problem, blue screens, bios sometimes say it is HS_4_HB or sAmSuNg and there is a boot problem.
after many sites and a lot of reading I have found that
zif connector is so fragile, max 30 inserts, i think that i over do that amount. i have ordered 40 pin zif connectors and i hope it will work. i will write it when it is done. mhdd didn’t show any bad sectors, i have removed ram and it must work.
it will be done on thursday :)
I was working on mine again today, but trying something different – after one bad purchase (never got the right drive from mini-laptop-accessories, out $60 after return to China was lost) and a second purchase the Aspire won’t recognize the drive internally. I’ve been using it for a month or two by booting off an external SATA (100GB) USB drive, tried to use the external Samsung this way but the BIOS seem to have trouble with it (works sometimes on a warm boot – thr drive appears fine but the BIOS appears to have a problem recogizing it). The external SATA with two USB plugs is recognized by the second boot (hit F12 on first boot, and if not present Ctrl-Alt-Del and try again). I’ve attached the external case to the back of the monitor with industrial-strength Velcro… Not ideal, but it’s running and a hell of a lot better than the 8GB SSD it came with :-)
I wonder if some of these Aspires came with BIOS chips that just can’t detect the Samsung or the external PATA case …
ok, I have got my zif lif tape, I ordered TOSHIBA type with 2 blue sides and one with blue-white. It is not important if it is flipped or normal, because hdd can be flipped.
Installed blue-white , locked hdd connector and tape just got out of there, too thick.
Connected motherboard with blue one, so i could see blue end, placed hdd , so I could see connector and inserted (tough, but it clicked) blue end, so I could see silver stripes. mounted everything and it works after few tries (it is fragile and not tolerant to mistakes). now scanning entire hdd in windows on new samsung hs04thb.
I was trying the same thing: add hard disk space (the built-in one died. Not supposed to, but did).
Reading all these comments, I found that a Samsung Mini1 costs much less here (RM 160) versus a barebone drive with ZIF (RM 230). So I bought the Samsung Mini1 (200 GB) and attached it to one of the USBs, and installed Ubuntu Netbook. It is faster than the original one, boots nicely.
Next step: I opened the casing of the Samsung without too much damage (I’ll explain elsewhere how), and out came a nice hard disk with MicroUSB on the board.
Then I opened the casing, removed all stuff, including lid with screen, and dremeled away the 3 mounting holes for the flash, a little bit more on the inside of the 3G, and now the disk fits, with cable, either horizontally or vertically (I meanwith the USB to the right or to the top, extending into the 3G-opening.
First part done. Now I can run the Aspire from the “built-in” Samsung Mini1, but still with a cable extending out of the 3G-opening and taking 1 out of 3 USB-plugs. Ugly. Next I’ll try to solder the 4 wires to the board.
Now I don’t like to solder underneath the WiFi-adapter. There is another report, where the author solders to some pins in the 3G-compartment. Unfortunately, the pictures are not clear. Some tape hides totally the pins used.
Can anyone give me a hint, which pins are most conveniently accessible?
First of all thanks for the site, step by step with photos, cracking job!
Followed all the instructions, even bought new cables and an identical PATA drive. Mounted the drive reassambled the unit. Now it wont power up. I took it apart again, reassambled it and tried to power it up as I reattached each part. Powered up until I the board with the track pad onto the unit.
Any ideas what that’s about?! Why would screwing the board back on cause complete power failure?
any hints would help. thanks in advance
@Danny, it is possible that your hands were statically charged when you handles the track-pad or it’s relevant controller chip.
And have fried it.
It is also possible that you didn’t plug it correctly and the BIOS is checking that and not letting it boot.
Thanks for the reply
I did ground myself frequently during the process and the machine does fire up with the trackpad ribbon inserted, soon as I put the screws in it fails to power up or even charge the battery.
Will look at it again tomorrow (had it in bits 3 times today!) and let you know how I get on.
PS when the power comes on (without the screws)the hard disc powers up too. I am having major issues with the bios, the acer flash guide was slightly vague and ended up (seemingly) wiping all the data from the chip, I’m waiting for a flash drive to try and address this. Will keep all you helpful people updated!
It just occurred to me that when I was first trying to install the Samsung internally (with many different ZIF cables, and tested the HD connection with an external case each time) the Acer seemed dead on at least one occasion. When I put the original SSD in it booted (and I called it a night, considering myself lucky I hadn’t killed it). Maybe there’s something bad about the cable connections on the motherboard side… if you remove the drive and either reinstall the original SSD or leave it out, attach an external drive via USB, then boot and F12 at the prompt, then give it the old Microsoft three fingered-salute (Ctrl-Alt-Del) until at F12 the external drive shows up you may be able to run off a USB drive instead (using mine that way right now)…
Funny thing, even externally the Samsung has problems, it reports missing files (after two installs) after working once or twice. Instead I’m using a SATA externally (which takes TWO USB sockets instead of one-sigh) but it’s 100GB instead of 60, and the speed isn’t bad :-)
One of these days I might try to install again but I’m happy with the Velcro’ed hybrid I’ve got running now, still gets 5+ hours battery life with the larger battery…
its really wierd, had another crack this morning. trackpad board off, no probs, attached track cable, fine. clipped the board at the back by the battery, fine, down the left side fine. soon as the right clicks in it dies. my uneducated guess is something on that daughter board maybe? its the only thing on that side of the case.. i have 3 laptops in bits and 2 desktops on repair right now. get back to it later!
and the drive seems fine i can here it revving up and power is supplied.. im having boot issues with acers awesome flash utility. that seems to have wiped my bios, need to wait for a flash drive to arrive before i can see if the disc is even detected
Found the problem with my power issue and the trackpad plate issue. Locking the final latches down is apparantly pushing the motherboard down. Down so far that it is screwing with the battery. Not sure how or why this is as the board is now slightly raised above its original position. I’m going to measure the maximum distance between battery and power pins and mount some foam pads to give it some breathing room.
Hopefully my ‘acer approved’ flash drive will arrive tomorrow and I can see if the whole experiment has worked. This is my first forray into netbook modding.
Tell you all, I’m chuffed I figured out the nature of the problem!
Hi, should the HD in he VERBATIM Pocket Hard Drive USB 2.0 work for this mod? It’s 1.8″ but i can’t find what kind of connection does it have
Just wanted to say THANK YOU for this guide and all the comments. After frying my old Intel SSD somehow, I was sad to see my AA1 go – until I read this tutorial and all of the comments (took me a while but worth it!)
I’d taken my AA1 apart before to upgrade the ram so was confident about getting into it. The 60gb HDD you used was a big large for my needs so bought a 30gb Samsung HS030GB from Ebay for £30. Used the old ribbon cable, connected it up (cable upside down at the HDD end- only went in a little way but seemed sturdy) and it all worked first time! Installed Linux Mint from a USB and here I am now. Only been active for a few minutes but it’s all looking good. So happy I’m still using this machine and it’s even faster than when bought it. Result!
Thanks again, I owe you!
i have bought on ebay from china samsung HS06THB like on video clip http://qik.com/video/183950 from tnkgrl, i also flipped the cable upside down liko on video, blue tape on cable is above like on video when i inserted it to motherboard and other side of cable blue tape is down. Cable is labeled zif/lif 20624.
After i have connected the cable i powered up acer aoa110 and initialy i heard in 2 sec hdd but in BIOS 3109 is nothing. Please help what to do, i have ordered another zif cable for acer aspire one on ebay. I cant believe that the HDD is maybe damaged because it was well packed when it arrived.
Thanks for this mod. I was a bit scared to open up my AOA110 (first time to open a laptop/netbook for me), but the instructions were so clear I just went for it. And now I am happily installing Ubuntu netbook remix on the Samsung drive (same as in the mod).
Hi I got a s\hand toshiba 30Gb from Ebay and Im having problems with it, I think its failing. I want to fit a new hard drive to it, does anyone know what is the largest in GB’s 1.8″ PATA I can fit in it, I want to go for if poss. 120Gb’s
Hello tnkgrl. I just got my samsung HS06THB and installed it with the cable i found on ebay like you suggested. On the first he was recognized and i installed XP, all fine, working perfectly and super-fast. After a reboot it went suddenly nuts… now when i boot it, the bios won’t recognize the drive but if i enter the bios settings, reloading default settings and then reboot or even just entering and exiting the bios the drive is recognized… but i have to enter bios every time i boot! I tried removing battery and flashing the bios to 3309 but no use… obviously the old SSD with its original cable works like a charm. Any suggestion?
Hi there — thanks for the tutorial. Put a Samsung 30GB drive in my AOA-110. Ribbon cable was a bit of a pain, but got it working without too much hassle.
Any clues to where to get a replacement keyboard connector. Managed to break the “hinge” on it while disassembling tired one evening..
Soldering it on won’t be a problem just as long as i manage to find one of those connectors :)
So I’ve read through most of the comments and It seems people are having quite a few problems getting these drives to work. So my question, of all the drives people are using, which one has the best chance of working? 60/80GB would be perfect.
I put in a Toshiba MKGal back in October 2010 and it’s been running fine since then. Then this evening I booted up and after about 30 or 40 seconds it shut down like someone had pulled the plug out of the wall. I rebooted and went to the boot selection menu and left it there and same thing. I did this a few times and every time it would just loose power after 30 seconds. It extremely consistent, and doesn’t matter whether I boot into Linux, or just go to the bios menu doing nothing – it just dies every time after almost exactly 30 seconds. It’s not hot and doesn’t exhibit any peculiar behavior, it just powers off after 30 seconds every… I’ve never seen anything like this, does anyone have any ideas?
I haven’t seen quite that with the Acer, but a Sony Vaio laptop I used to use went through a strange spell. First the display would scramble on occasion (I suspected the neighbor’s microwave). Then after a few weeks the display stopped working. I went with an external monitor. More things started failing, and I opened it up – a tiny little dust bunny was stuck on the BIOS pins (of course, that laptop was like a vacuum – no fan with the Acer). After removing it everything was like new. It could be a short caused by dust or something that isn’t quite where it should be…
Try and boot using LiveCD (LiveUSB).
Can anyone give me a link to a supplier for cable that will fit then “SAMSUNG HS06THB” LIF connector. The links I have seen from other responders are out of date.
Hi I want to install a http://www.amazon.com/Super-Talent-1-3-Inch-Aspire-FEM32GF13M/dp/B001H14G4M into a A150 for a friend and before I open it up and void the warranty id like to find out if its possible, basically replacing the current HDD with a SSD, I have replaced this SSD in a A110 with this exact one and worked a treat, now just wanna find out if its doable in a A150. Thanks guys and girls :)
Not possible. That SSD has a ZIF connector. The A150 has a SATA connector but no ZIF. Buy a 2.5″ SATA SSD instead.
Hi, re: Modding the Acer Aspire One hard drive tnkgrl Mobile. %ANCHOR_TEX%. I recently also had a fault on my laptop; sony vaio HDD is dead, fortunately got it fixed last Sunday at this place in harrow, easy to reach via the London Underground train. Get off at Harrow & Wealdstone station (on bakerloo line) and its ten minutes walk to the Laptop Repair Company. Good reliable service with warranty & affordable. Hope this helps. Nathan
Tnkgrl you are amazing. I installed a samsung HDD 1.8″ without any problems. Thanks a lot for the guide and wish you and all the readers of this blod Merry xmas!
I had the exact problem as Mark, and had to order some flip cables from eBay as well. I haven’t received them yet . Anyways, I’m sure this is what you’re looking for. Go to eBay and search for zif flip. You’ll find lots. I got the 3 pack 5cm, a 3 pack 10cm, and a 3 pack of original.
apple desktop repair
It reminds me of the same small thing I found when I installed the drone, the connector. It’s really amazing, it supports battery wiring to connect to more power, smaller size, stronger, and more reliable terminals. Because the battery not only has a power interface, but also has a data communication interface, the connector helps and supports power and signal contact to ensure that the circuit is fully discharged.
The connector I am using is from Shenzhen Hongru. (https://www.hrb-connector.com/board-to-board-connector.html)
Hi, It is such an excellent article, thanks for sharing this article with us.Also for further informations visit https://hard-drives.co/how-to-backup-toshiba-hard-drive